TF ErrorAna PropOfErr

Instrumental and Statistical Uncertainties

http://www.physics.uoguelph.ca/~reception/2440/StatsErrorsJuly26-06.pdf

Counting Experiment Example

The table below reports 8 measurements of the coincidence rate observed by two scintillators detecting cosmic rays. The scintillator are place a distance (x) away from each other in order to detect cosmic rays falling on the earth's surface. The time and observed coincidence counts are reported in separate columns as well as the angle made by the normal to the detector with the earths surface.

Date	Time (hrs)	[math]\theta[/math]	Coincidence Counts	Mean Coinc/Hr	[math]\sqrt{Mean Counts/Hr}[/math]	[math]\left | \sigma \right |[/math] from Mean
9/12/07	20.5	30	2233	109	10.4	1
9/14/07	21	30	1582	75	8.7	2
10/3/07	21	30	2282	100	10.4	1
10/4/07	21	30	2029	97	9.8	0.1
10/15/07	21	30	2180	100	10	0.6
10/18/07	21	30	2064	99	9.9	0.1
10/23/07	21	30	2003	95	9.7	0.2
10/26/07	21	30	1943	93	9.6	0.5

The average count rate for a given trial is given in the 4th column by diving column 3 by column 2. Is the variation statistical?

[math]\sigma^2_{Poisson} = \mu =[/math] Mean Coinc/Hr [math]\frac{\sum CPM_i}{8} = 97.44[/math]

[math]\frac{\sum Counts}{\sum time} = \frac{16316}{167.5}=97.41[/math]

The above 2 expressions are equivalent because all the denominators are essentially the value 21

[math]\frac{sum (x_i-\mu)^2}{8-1} = 10.8[/math]

P=68% = Probability that a measurement of a Gaussian variant will lie within 1 [math]\sigma[/math] of the mean

[math]= 0.68 * 8 = 5[/math]

Looks like we have 7/8 events within 1[math] \sigma[/math] = 87.5%

Taylor Expansion

A quantity which is calculated using quantities with known uncertainties will have an uncertainty based upon the uncertainty of the quantities used in the calculation.

To determine the uncertainty in a quantity which is a function of other quantities, you can consider the dependence of these quantities in terms of a tayler expansion

Consider a calculation of a Table's Area

[math]A= L \times W[/math]

The mean that the Area (A) is a function of the Length (L) and the Width (W) of the table.

[math]A = f(L,W)[/math]

The Taylor series expansion of a function f(x) about the point a is given as

[math]f(x) = f(a) + \left . f^{\prime}(x)\right |_{x=a} \frac{x}{1!} + \left . f^{\prime \prime}(x)\right |_{x=a} \frac{x^2}{2!} + ...[/math]

[math]= \left . \sum_{n=0}^{\infty} f^{(n)}(x)\right |_{x=a} \frac{x^n}{n!}[/math]

For small values of x (x << 1) we can expand the function about 0 such that

[math]\sqrt{1+x} = \left . \sqrt{1-0} \frac{1}{2}(1+x)^{-1/2}\right |_{x=0} \frac{x^1}{1!}+ \left . \frac{1}{2}\frac{-1}{2}(1+x)^{-3/2} \right |_{x=0} \frac{x^2}{2!}[/math]

[math]=1 + \frac{x}{2} - \frac{x^2}{4}[/math]

The talylor expansion of a function with two variables[math] (x_1 , x_2)[/math] about the average of the two variables[math] (\bar {x_1} , \bar{x_2} )[/math] is given by

[math]f(x_1, x_2)=f(\bar {x}_1, \bar{x}_2)+(x_1-\bar {x}_1) \frac{\partial f}{\partial x_1}\bigg |_{(x_1 = \bar {x}_1, x_2 = \bar{x}_2)} +(x_2-\bar{x}_2) \frac{\partial f}{\partial x_2}\bigg |_{(x_1 = \bar {x}_1, x_2 = \bar{x}_2)}[/math]

or

[math]f(x_1, x_2)-f(\bar {x}_1, \bar{x}_2)=(x_1-\bar {x}_1) \frac{\partial f}{\partial x_1}\bigg |_{(x_1 = \bar {x}_1, x_2 = \bar{x}_2)} +(x_2-\bar{x}_2) \frac{\partial f}{\partial x_2}\bigg |_{(x_1 = \bar {x}_1, x_2 = \bar{x}_2)}[/math]

The term

[math]f(x_1, x_2)-f(\bar {x}_1, \bar{x}_2)[/math]

represents a small fluctuation of the function from its average [math]f(\bar {x}_1, \bar{x}_2)[/math] if we ignore higher order terms in the Taylor expansion ( this means the fluctuations are small).

Based on the Definition of Variance

[math]\sigma^2 = \frac{\sum_{i=1}^{i=N} (x_i - \bar{x})^2}{N}[/math]

We can write the variance of the area

[math]\sigma^2_A = \frac{\sum_{i=1}^{i=N} (A_i - \bar{A})^2}{N}[/math]

[math]= \frac{\sum_{i=1}^{i=N} \left [ (L-\bar{L}) \frac{\partial A}{\partial L} \bigg |_{\bar L \bar W} + (W-\bar W) \frac{\partial A}{\partial W} \bigg |_{\bar L \bar WW} \right] ^2}{N}[/math]

[math]= \frac{\sum_{i=1}^{i=N} \left [ (L-\bar{L}) \frac{\partial A}{\partial L} \bigg |_{\bar L \bar W} \right ] ^2}{N} + \frac{\sum_{i=1}^{i=N} \left [ (W-\bar W) \frac{\partial A}{\partial W} \bigg |_{\bar L \bar W} \right] ^2 }{N}[/math]

[math]+2 \frac{\sum_{i=1}^{i=N} \left [ (L-\bar{L}) (W-\bar W) \frac{\partial A}{\partial L} \bigg |_{\bar L \bar W} \frac{\partial A}{\partial W} \bigg |_{\bar L \bar W} \right]^2}{N} [/math]

[math]= \sigma^2_L \left ( \frac{\partial A}{\partial L} \right )^2 +\sigma^2_W \left ( \frac{\partial A}{\partial W} \right )^2 + 2 \sigma^2_{LW} \frac{\partial A}{\partial L} \frac{\partial A}{\partial W} [/math]

where [math]\sigma^2_{LW} = \frac{\sum_{i=1}^{i=N} \left [ (L-\bar{L}) (W-\bar W) \right ]^2}{N}[/math] is defined as the Covariance between [math]L[/math] and [math]W[/math].

Weighted Mean and variance

If each observable ([math]x_i[/math]) is accompanied by an estimate of the uncertainty in that observable ([math]\delta x_i[/math]) then weighted mean is defined as

[math]\bar{x} = \frac{ \sum_{i=1}^{i=n} \frac{x_i}{\delta x_i}}{\sum_{i=1}^{i=n} \frac{1}{\delta x_i}}[/math]

The variance of the distribution is defined as

[math]\bar{x} = \sum_{i=1}^{i=n} \frac{1}{\delta x_i}[/math]

Date	Time (hrs)	[math]\theta[/math]	Coincidence Counts	Coinc/Hour	[math]\sqrt{N}[/math]
9/6/07	18	45	1065	59.2
9/7/07	14.66	45	881	60.1
9/9/07	43	60	1558	36.23
9/12/07	20.5	330	2233	108.93
9/13/07	21	315	2261	107.67
9/14/07	21	330	1582	75.33
9/18/07	21	300	1108	52.8
9/19/07	21	300	1210	57.62
9/20/07	21	300	1111	52.69
9/21/07	21	300	1012	57.62
9/26/07	21	315	1669	79.48
9/27/07	21	315	1756	83.29
9/29/07	24.5	315	2334	95.27
10/3/07	21	330	2282	108.67
10/4/07	21	330	2029	96.62
10/10/07	21	315	1947	92.71
10/15/07	69	330	2180	31.59
10/18/07	21	330	2064	98.52
10/23/07	21	330	2003	95.38
10/26/07	21	330	1943	92.52
11/2/07	21	330	2784
11/5/07	69	330	10251	148.57
11/16/07	21	30	3581	170.52

[1] Forest_Error_Analysis_for_the_Physical_Sciences