Difference between revisions of "TF EIMLab8 Writeup"

From New IAC Wiki
Jump to navigation Jump to search
Line 18: Line 18:
 
IN5230-B-T  (4.7 Volt Zener Diode),  The other diode is the IN5238B
 
IN5230-B-T  (4.7 Volt Zener Diode),  The other diode is the IN5238B
  
Data sheet =>IN5230-B-T_DataSheet.pdf
+
Data sheet =>[[File:IN5230-B-T_DataSheet.pdf]]
  
 
{| border="3"  cellpadding="20" cellspacing="0"
 
{| border="3"  cellpadding="20" cellspacing="0"

Revision as of 19:05, 4 March 2011

Lab 8 The Diode Objective: Measure the current-voltage curve of a silicon diode.

Reverse current

1.) Construct the circuit below using a DC power supply, a diode.

Lab8 ReverseCurrentDiode.png

2.) attach an Oscilloscope set to 1M[math]\Omega[/math] input impedence so the probe is located at point B. The oscilloscope's internal resistance will serve as a Resistor (R) to measure the voltage across the diode and calculate the current.


3.) Calculate the value of R needed to observe the current without burning up the diode. What is the max reverse voltage you will have.

3.) Measure the diode reverse current [math]I_r \lt 1 \mu A[/math] as a function of the DC supply voltage. (30 pnts)


IN5230-B-T (4.7 Volt Zener Diode), The other diode is the IN5238B

Data sheet =>File:IN5230-B-T DataSheet.pdf

V_Z Z_Z (I_Z) I_R (V_R) Max Power
4.7 19\Omega (20 mA) 2\mu A (1 Volt) 500 mW


Bias Volts V_{scope} (1 M\Omega)(mV) Current (V/R) Power
-2.5\pm 0.05 5 \pm 7 5/50 = 0 \pm 0.02 mA
-4.4\pm 0.05 59\pm 10 mV 0.59 \pm 0.1 mA
-4.70 \pm 0.05 220 \pm 10 mV 2.2 \pm 0.1 mA 449 mW
-5.03 \pm 0.05 1050 \pm 15 10.5 \pm 0.2 mA
-5.22 \pm 0.05 2280 \pm 50 22.8 \pm 0.5 mA too much power
Bias Volts V_{scope} (1 M\Omega)(mV) Current (V/R) Power
2.50 \pm 0.05 24 \pm 1 24/50 = 0.5 \pm 0.02 mA 125
3.14 \pm 0.05 31.1 \pm 2 0.62 \pm 0.064 mA
4.07\pm 0.05 109 \pm 03 mV 2.18 \pm 0.06 mA
4.46 \pm 0.05 274 \pm 3 mV 5.4 \pm 0.06 mA
4.74 \pm 0.05 824 \pm 10 mV 16.48 \pm 0.2 mA 449 mW
4.89 \pm 0.05 1860 \pm 10 37.2 \pm 0.2 mA
5.02 \pm 0.05 3880 \pm 10 77.6 \pm 0.2 mA
Bias Volts V_{scope} (1 M\Omega)(mV) Keithley ammeter
0.6 \pm 0.001 2 \pm 1 1.24 \pm 0.01
0.9 \pm 0.001 10 \pm 1 8.69 \pm 0.01 nA
1.05 \pm 0.005 22 \pm 0.5 mV 24.3 \pm 0.05 nA
1.16 \pm 0.005 40 \pm 1 mV 49.4 \pm 0.05 nA
1.23 \pm 0.005 56 \pm 1 mV 78.6 \pm 0.05 nA
1.27\pm 0.005 68 \pm 1 mV 98.2 \pm 0.005 nA
1.30\pm 0.005 75 \pm 1 118.2 \pm 0.5
1.35 \pm 0.005 93 \pm 1 158.2 \pm 0.5
1.4 \pm 0.005 112 \pm 1 213.0 \pm 0.1
1.45 \pm 0.005 132 \pm 1 279.1 \pm 0.1 nA
1.50 \pm 0.005 155 \pm 1 366 \pm 0.5 nA
1.55 \pm 0.005 182 \pm 1 474 \pm 0.5
2.53 \pm 0.01 902 \pm 4 24 \pm .5 \times 10^{3} nA
2.95 \pm 0.05 290 \pm 9 10 \pm 1 \times 10^{4} nA
3.85 \pm 0.05 2240 \pm 20 83 \pm 1 \times 10^{4}
4.62\pm 0.05 2900 \pm 6 8.0 \pm 0.5 \times 10^{6}
5.5 \pm 0.05 3740 \pm 30 NA
6.4 \pm 0.05 4760 \pm 23
7.4 \pm 0.05 5700 \pm 33
9.84 \pm 0.05 8.04 \pm 30

4.) Fill in the blank. The reverse biased diode act as a constant _______________ source. (5 pnts)

Forward Current

  1. now swap the diode direction and repeat the measurement in the previous section.

Lab8 ForwardCurrentDiode.png


IN5230-B-T (4.7 Volt Zener Diode)

Bias Volts V_{scope} (1 M\Omega)(mV) Keithley ammeter
0.922 \pm 0.005 1780 \pm 40 17.80 \pm 0.4 mA
0.953 \pm 0.005 2800 \pm 40 28.0 \pm 0.4
1.00 \pm 0.005 4280\pm 50 42.8 \pm 0.5
Bias Volts V_{scope} (1 M\Omega)(mV) Keithley ammeter
0.850 \pm 0.005 1740 \pm 20 1740/50 = 34.8 mA
0.872 \pm 0.005 3090 \pm 20
0.883 \pm 0.005 4230\pm 35

Graph

  1. Plot the diode current (on the ordinate) versus the diode voltage (on the abscissa)for both the reverse and forward bias measurements. (50 pnts)

200

Questions

  1. The reverse biased diode acts like a constant ____________. (10 pnts)
  2. The forward biased diode has a very __________ resistance. A reverse biased diode has a very ____________ resistance.(10 pnts)
  3. The approximate DC forward resistance for diode #___________ is _________ when the forward current is _______________.(10 pnts)
  4. The approximate DC reverse resistance for diode #___________ is _________ when the forward current is _______________.(10 pnts)
  5. The silicon diode #___________ has an approximate turn on voltage of ___________.(10 pnts)


Forest_Electronic_Instrumentation_and_Measurement