Difference between revisions of "TF EIMLab17 Writeup"

From New IAC Wiki
Jump to navigation Jump to search
(Created page with 'The JFET (Junction Field Effect Transistor n-channel) File:JFET_MPF102_Pinouts.png File:JFET_MPF102_DataSheet.pdf 1.) Complete the table below for the JFET. {| bor…')
 
Line 9: Line 9:
 
1.) Complete the table below for the JFET.
 
1.) Complete the table below for the JFET.
  
 +
Only <math>R_D</math> is not know.  If we want currents up to 5 mA using a 10 Volt power supply then <math>R_D</math> should be 2 k<math>\Omega</math>
  
 
{| border="3"  cellpadding="20" cellspacing="0"
 
{| border="3"  cellpadding="20" cellspacing="0"

Revision as of 23:55, 5 April 2011

The JFET (Junction Field Effect Transistor n-channel)


JFET MPF102 Pinouts.png


File:JFET MPF102 DataSheet.pdf

1.) Complete the table below for the JFET.

Only [math]R_D[/math] is not know. If we want currents up to 5 mA using a 10 Volt power supply then [math]R_D[/math] should be 2 k[math]\Omega[/math]

Parameter Value
[math] I_{DSS}[/math]
[math]V_{GS(off)}[/math]
[math]P_{max}[/math]
[math]R_G[/math] 3.3 M[math]\Omega[/math]
[math]R_D[/math]
[math]y_{fs}[/math]
[math]y_{is}[/math]
[math]y_{os}[/math]

2.)Construct the JFET circuit below.

TF EIM Lab17Circuit.png

3.)Plot measurements of [math]I_D[/math] -vs- [math]V_{DS}[/math] by varying [math]V_{dd}[/math] for [math]\left | V_{GS}\right |[/math] = 0, 0.5, 1.0, 1.5 V. (40 pnts)

4.)Plot[math] I_D[/math] -vs- [math]V_{GS}[/math] (30 pnts)

5.)Calculate [math]y_{fs}[/math] for your JFET (20 pnts)

Question

  1. Does [math]y_{fs}[/math] depend on[math] I_D[/math]? (10 pnts)

Forest_Electronic_Instrumentation_and_Measurement