Difference between revisions of "Struck SIS3302 ADC"

From New IAC Wiki
Jump to navigation Jump to search
Line 92: Line 92:
 
->  s3320Init(0x50000000,0,0)
 
->  s3320Init(0x50000000,0,0)
 
s3320Init: ERROR in sysBusToLocalAdrs(0x09,0x50000000,&laddr)  
 
s3320Init: ERROR in sysBusToLocalAdrs(0x09,0x50000000,&laddr)  
 +
value = -1 = 0xffffffff
 +
</pre>
 +
 +
 +
tried with bits swapped
 +
 +
<pre>
 +
-> s3320Init(0x05000000,0,0)
 +
s3320Init: ERROR in sysBusToLocalAdrs(0x09,0x5000000,&laddr)
 
value = -1 = 0xffffffff
 
value = -1 = 0xffffffff
 
</pre>
 
</pre>

Revision as of 18:53, 21 November 2016

SIS 3302 ADC digitizer

Manual

File:SIS3302ADC.pdf

DIP settings

Address
Jumper location
JP120A top
JP120B top
JP120C top
JP120D top
JP102 top


JP101 settings, left pin is toward front face of module

Address
pins location
left top
right top

Jumper JP80 settings

Address
Pin Setting
1 ON
2 OFF
3 OFF
4 OFF
5 ON
6 OFF
7 OFF
8 ON
JTAG jumpers (JP102) are closed on bottom for VME configuration


Address switches

SW1=5 SW2=0

A32 address = 0x50000000

ROC Lib

ROC source directory

Original files on DAQ1 are located in

/home/daq/CODA/ROClibs/sis3300

A copy was put in

/home/daq/CODA/ROClibs/SIS3302


Functions

sisInit

s3320Init (0x50000000, 0, 0)

error message

->  s3320Init(0x50000000,0,0)
s3320Init: ERROR in sysBusToLocalAdrs(0x09,0x50000000,&laddr) 
value = -1 = 0xffffffff


tried with bits swapped

-> s3320Init(0x05000000,0,0)
s3320Init: ERROR in sysBusToLocalAdrs(0x09,0x5000000,&laddr) 
value = -1 = 0xffffffff


VME_modules