Difference between revisions of "SIS3600 Trigger Supervisor"

From New IAC Wiki
Jump to navigation Jump to search
Line 49: Line 49:
  
 
and I saw it turn off
 
and I saw it turn off
 +
 +
 +
[http://www.iac.isu.edu/mediawiki/index.php/Data_Acquisition Back to DAQ]

Revision as of 17:52, 23 October 2007

Setting address

SIS3610 Address.gif

Address
Pin Setting
SW-A32L 3
SW-A32U 8
SW-A24L 3
SW-A24U 8
SW-A16 3


There was also a of jumpers labeled "EN_A16, "EN_A24" and "EN_A32". The factory default setting was "EN_A32" so I moved the jumper to "EN_16".

I left the base address unchanged. Which means for A16 addressing mode the address will be 0x3800.


Test Communication from ROC console

From the ROC console (minicom window) I tried talking to the SIS3610 using the library function "s3610Init"

->  s3610Init 0x3800                                                            
Initialized SIS3610 ID 0 at address 0x91003800                                  
value = 0 = 0x0


The next test was to try and turn the user LED (labeled "U" on the front pannel) on and off.

From the ROC console I typed

-> s3610SetLED                                                                  
value = 0 = 0x0                                                                 

and I saw the green LED light up

I then typed

-> s3610ClearLED                                                                
value = 0 = 0x0                                                                 

and I saw it turn off


Back to DAQ