Difference between revisions of "R1S5 SL1 HVB1 BurnIn"

From New IAC Wiki
Jump to navigation Jump to search
Line 18: Line 18:
 
|-
 
|-
 
| 07/19/13 || 14:51 ||  536 || 680 ||  -680 ||4.0 || 4.2  ||  
 
| 07/19/13 || 14:51 ||  536 || 680 ||  -680 ||4.0 || 4.2  ||  
 
+
|-
 +
| 07/22/13 || 07:51 ||  536 || 670 ||  -670 ||4.0 || 4.2  ||
  
  

Revision as of 13:42, 22 July 2013

Date Time (24h) Guard (V) Sense (V) Field (V) Sense ([math]\mu[/math]A) Field ([math]\mu[/math]A) comments
06/25/13 15:05 30 40 -50 0.0 0.025 Guard current is at 15.9 microamps. Have never observed it above 0.000 before. Turned off voltage to check cabling setup.
06/25/13 15:19 30 40 -50 0.0 0.025 Found a grounding strap attached to the HVB side of Board 1. Removed and torqued down the screw it was on. Guard current is normal now. Field/sense current stabilized within 30 seconds to this reading.
06/25/13 15:22 536 1500 -750 4.6 4.7 Current appears stable +/- 0.2 microamps for at least 30 seconds after finishing voltage rise.
06/25/13 15:29 536 1500 -750 4.1 4.2
06/26/13 07:14 536 1500 -750 1.18 1.2
06/26/13 17:29 536 1500 -750 1.2 1.1 Shut off HV to switch back to the Kraken on SL2 and check current levels w/ grounding strap now removed.
07/19/13 22:40 536 - returned to burning in SL1 using the kraken after finishing SL2
07/19/13 14:51 536 680 -680 4.0 4.2
07/22/13 07:51 536 670 -670 4.0 4.2