Qweak flipbit

From New IAC Wiki
Revision as of 21:22, 17 September 2010 by Oborn (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

flipbit syntax

or it is called flipbittest.arm

echo "p 48 0 0 flip" | ./flipbit.arm -n

echo "PE I2Caddress register hexword command"

PE = primary or extended registers I2C Address = 16,,48,64,96,112 = I2C address of VFAT

register= 1-16 for primary 1-128 for extended, the extended switch above takes care of the address offsets

hexword= now you can write one bit or a hex word to a register (1/0 or 0xff),

commands: flip set, on off. use set to set bits, flip to flip bits, to turn bits on and off.


[1] Qweak