PositronTargetWorkByChrissJackson

From New IAC Wiki
Revision as of 18:28, 14 March 2012 by Jackchr2 (talk | contribs)
Jump to navigation Jump to search
Chriss Jackson's Positron Target development logbook
Goal
Construct a Tungsten target and vacuum enclosure to be used for generating positrons using an incident electron beam.

Geometry

Tungsten Disks

Dimensions are in cm

HRRL PosTargetDesign 4-20-11.png

http://www.alibaba.com/product-gs/346924116/Tungsten_Disk_With_Screw.html


http://www.zlxtech.com.cn/products.asp?productcode=7401000404

http://www.cleveland-tungsten.com/


If the motor has a radius of 2.5" and I want to shield the motor from the beam using 2" of Pb and the beam is about 1" in diameter then I want a Tungsten disk that is

5.21" in radius = 13.25 cm in radius ~ 30 cm in diameter


Target Chamber design

Latest Design From empire and Sadiq's measurement of the available space


EmpMagHRRLPositronTargetChamberDrw 9-20-11.png HRRLPositronTargetSpace 10-5-11.png HRRLPositronTargetCoupler 10-5-11.png HRRLPositronTargetHub 10-5-11.png
Target motor Design Available beam line space Motor axle coupling to rotary union Hub and spline to attache targets


Equipment

Motor

Controller

Vacuum Chamber

Feedthroughs

Performance tests

Heat load calculation

HRRL_Positron_Rotating_W_Target