PosRun 12 09 2013
Jump to navigation
Jump to search
In-flight
| Run # | Run Duration (s) | Configuration |
| 6502 | min s (54297 pulses) | same as above except: REmoved Al brick beam stop |
40 MeV on Tungsten
40 MeV electrons are hitting the positron production Tungsten target
| Run # | Run Duration (s) | Configuration |
| 6503 | 3 min 46 s ( pulses) | Dipoles in positron mode. Al Brick in along 8 inch length |
| 6504 | min s ( pulses) | same as previous run, Al brick OUT |
| 6505 | min s ( pulses) | same as previous run, Dipoles in Electron mode, 
|
| 6506 | min s ( pulses) | same as previous run, Selection Magnet bending electrons up positioned after 50 micron Ti vacuum window, 
|
| 6507 | min s ( pulses) | same as previous run, dipoles set to positron mode and selection magnet rotated 180 degrees so positrons bend up, |
| 6508 | min s ( pulses) | same as previous run:increase voltage from -700 to -850 |
| 6509 | min s ( pulses) | same as previous run, installed 2" thick graphite hardener |
| 6510 | min s ( pulses) | same as previous run, removed graphite hardener and selection magnet, returned to dipoles in electron mode, |