Peaks fitting

From New IAC Wiki
Revision as of 04:18, 13 November 2008 by Oborn (talk | contribs)
Jump to navigation Jump to search

Greatfit.m (Matlab program fot fitting)

The above program is used to estimate the number of counts in the neutron peak. It has been fitted by gaussian functions. Estimation was performed for run # 1 (file pf_10_10_08_00040.asc) with D2O target and detector A above the target. Ratio of the area under the fitting curve (green) to the area under the neutron peak (red)is between 1 and 2% for all three detectors.

Fit.jpg Fit2.jpg Fit3.jpg


Go Back