PbFl RadTests-12-3-07

From New IAC Wiki
Revision as of 21:15, 20 November 2007 by Oborn (talk | contribs)
Jump to navigation Jump to search

Day 1. December 3, 2007.


Who: Pierre, +?

 Glass Slides at 10 cm, 30 cm, and 50 cm.  

Brett says the electron beam onto the window is 1 mm in diameter. After it passes throught the water-cooled exit window (Al 1mm - Water 1mm - Al 1mm), the beam swells to 0.6mm and at 30cm it the beam spot size is 2cm.

 Beam spot size mapping in x and y with the Faraday Cup (FC) for z = 30cm from Window.  

We will move the table in or out depending on whether the beam spot size is greater or smaller than 2.0 cm. Translator table will be positioned at right position in z.


Linearity tests of the pickup coil and FC.

We will just change the width of the pulse and compare the readings from the pickup coil to that of the FC. Note that change in 1 mV from the pickup coil corresponds to 1 mA change in the instantaneous beam current.

Pulse Width (us) pickup coil (mV) FC
0.08

0.10

0.16

0.30
0.50
0.75
1.00
2.00



5 hours of beamtime
o Irradiate broken PbF2 Crystal for 0.5 h  and check how the temperature rise.
o Place Crystals 1, 2, 3, 4 on translator table.
    * Crystal 1:  2 hours
    * Crystal 2:  1 hours
    * Crystal 3:  1 hour
    * Crystal 4:  0.5 hours
o Transparency Test (~3 hours)
o Blue Light curing (24 hours)