PbBi BeamLine Elements

From New IAC Wiki
Revision as of 23:26, 14 May 2015 by Foretony (talk | contribs) (→‎Quads)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Beam spot parameters

Below is an assumed electron beam from the 25b machine (or any medical linac)

Kim HRRL Optics 10-14-10.png


https://wiki.iac.isu.edu/index.php/IAC_LeadTunstateCherenkovCrystalTests_2-15

Beam Line Elements

PositronBeamLine Layout.jpg

This picture shows you the current 90 degree bend into the experimental hall. Quad 1 and Quad 2 are shown and then the 2nd Dipole magnet (labeled Bending Magnet 2A a.k.a. Dipole 2) begins after Quad 1 and Quad 2.

IAC 25MeV 90DegreeBend 11-08-07.jpg

Dipole

Label on side of Dipole 1

IAC 25MeV Dipole1 Label 11-08-07.jpg

Label on side of Dipole 2

IAC 25MeV Dipole2 Label 11-08-07.jpg


IAC 25B Dipole.jpg

Quads

Quad mapping of type 2 quads


https://wiki.iac.isu.edu/index.php/Mapping_of_Quadruple_Magnets

IAC 25B Quads.jpg


The Quad doublets in the current beam line have the following label.

IAC 25MeV QuadDoublet Label 11-08-07.jpg

Quad doublet size:

QuadDoublet Width.jpg

QuadDoublet Length.jpg

QuadDoublet CoilSize.jpg


G4Beamline_PbBi#Beam_Line_Design

Retrieved from "https://wiki.iac.isu.edu/index.php?title=PbBi_BeamLine_Elements&oldid=101079"