Revision as of 23:14, 20 July 2021

This experimental setup does not contain BorAl

General run plan

Run source in and source out in experimental setup and background subtract with NaI

Move the source to different locations along the source tunnel and plot the different distances and count rates

Run source in and source out in experimental setup and background subtract with He3

Move the source to different locations along the source tunnel and plot the different distances and count rates

I will upload some models of the setup when I have updated the model to include the source and detector

NaI detector 30cm from converter

NaI Detector, 5mV threshold, +1000V on detector, no converter

Source Distance (cm)	Counts	Run Time (s)
39.5	1563	100
35	1631	100
30	1791	100
25	2054	100
20	2514	100
15	3375	100
10	6182	100

NaI Detector, 5mV threshold, +1000V on detector, with converter

Source Distance (cm)	Counts	Run Time (s)
39.5	1489	100
35	1581	100
30	1729	100
25	1936	100
20	2401	100
15	3249	100
10	5969	100

NaI Detector, 2mV threshold, +1000V on detector, no converter

Source Distance (cm)	Counts	Run Time (s)
39.5	2039	100
35	2228	100
30	2546	100
25	2960	100
20	3939	100
15	5349	100
10	10050	100

NaI Detector, 2mV threshold, +1000V on detector, with converter

Source Distance (cm)	Counts	Run Time (s)
39.5	2071	100
35	2225	100
30	2430	100
25	2825	100
20	3391	100
15	4861	100
10	9576	100

detector is 5cm from converter (5cm from end of detector tunnel towards source)

He3 detector, 1250V, no converter, 250mV threshold

Source Distance (cm)	Counts	Run Time (s)
39.5	2039	100
35	2228	100
30	2546	100
25	2960	100
20	3939	100
15	5349	100
10	10050	100

He3 detector, 1250V, with converter, 250mV threshold

Source Distance (cm)	Counts	Run Time (s)
39.5	2071	100
35	2225	100
30	2430	100
25	2825	100
20	3391	100
15	4861	100
10	9576	100

@@ Line 98: / Line 98: @@
 =='''7/20/21'''==
+detector is 5cm from converter (5cm from end of detector tunnel towards source)
 He3 detector, 1250V, no converter, 250mV threshold