Difference between revisions of "PAS Experiment Lead Shielding"

From New IAC Wiki
Jump to navigation Jump to search
(Created page with " ---- PAS_Shielding")
 
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
== Lead Bricks ==
  
 +
5/11/21
 +
 +
Painted half size lead bricks (1"x2"x4") with red epoxy based paint for safer handling when building shielding arrays. Made the mistake of letting them dry on porous surface and now have to find way to remove cardboard that is sealed to the last unpainted side of bricks.
 +
 +
 +
 +
[[File:PAS_Painted_Lead_Bricks_1.jpg|300px|thumb|left|Half of the first set of painted lead bricks on cardboard drying surface.]]
 +
 +
[[File:PAS_Painted_Lead_Bricks_2.jpg|300px|thumb|center|Half of the first set of painted lead bricks on cardboard drying surface.]]
 +
 +
 +
 +
== Lead Sheet ==
 +
 +
5/17/21 - 5/18/21
 +
 +
Sheared a lead sheet into 6 rough 3"x3" squares to be used for attenuation measurements with NaI detectors
 +
 +
Lead pieces were wiped down with a wet wipe, duct taped, rewiped, and hammered flat.
 +
 +
Thickness of the lead pieces is around 0.055".
 +
 +
 +
[[File:PAS_Lead_Sheet_Full_Bare.jpg|300px|thumb|left|Half of the first set of painted lead bricks on cardboard drying surface.]]
 +
 +
 +
[[File:PAS_Lead_Sheet_Edge_Bare.jpg|300px|thumb|center|Half of the first set of painted lead bricks on cardboard drying surface.]]
 +
 +
 +
[[File:PAS_Lead_Sheet_Full_Taped.jpg|300px|thumb|left|Half of the first set of painted lead bricks on cardboard drying surface.]]
 +
 +
 +
[[File:PAS_Lead_Sheet_Edge_Taped.jpg|300px|thumb|center|Half of the first set of painted lead bricks on cardboard drying surface.]]
  
  

Latest revision as of 23:44, 1 June 2021

Lead Bricks

5/11/21

Painted half size lead bricks (1"x2"x4") with red epoxy based paint for safer handling when building shielding arrays. Made the mistake of letting them dry on porous surface and now have to find way to remove cardboard that is sealed to the last unpainted side of bricks.


Half of the first set of painted lead bricks on cardboard drying surface.
Half of the first set of painted lead bricks on cardboard drying surface.


Lead Sheet

5/17/21 - 5/18/21

Sheared a lead sheet into 6 rough 3"x3" squares to be used for attenuation measurements with NaI detectors

Lead pieces were wiped down with a wet wipe, duct taped, rewiped, and hammered flat.

Thickness of the lead pieces is around 0.055".


Half of the first set of painted lead bricks on cardboard drying surface.


Half of the first set of painted lead bricks on cardboard drying surface.


Half of the first set of painted lead bricks on cardboard drying surface.


Half of the first set of painted lead bricks on cardboard drying surface.



PAS_Shielding