Difference between revisions of "PAA Selenium"

From New IAC Wiki
Jump to navigation Jump to search
 
(34 intermediate revisions by 2 users not shown)
Line 8: Line 8:
  
 
=Can one use plant material to measure the provenance of selenium?=
 
=Can one use plant material to measure the provenance of selenium?=
 +
 +
[[Se_Overview_PrevMeas]]
  
 
As shown in the Figure below, the Se-82/Se-76 ratio varies from -1.2% to +0.2% for plant materials but remains relatively constant for other materials.  The variations in plant material has been described as being due to differences in the bacteria residing in the plant.  The question to investigate is whether or not these variations in the concentration can be used to determine the provenance of the sample.
 
As shown in the Figure below, the Se-82/Se-76 ratio varies from -1.2% to +0.2% for plant materials but remains relatively constant for other materials.  The variations in plant material has been described as being due to differences in the bacteria residing in the plant.  The question to investigate is whether or not these variations in the concentration can be used to determine the provenance of the sample.
Line 68: Line 70:
 
=Experiments=
 
=Experiments=
  
==Preliminary Information Before Irradiation of Soil Sample==
+
==[[PAA_Selenium_ActivityCalc]]==
 
 
Using Detector D at the IAC, I had to get a count on the unirradiated soil sample that was collected. Here are the GPS coordinates ****
 
 
 
Here is the spectrum produced:
 
  
[[File:Soil No Irr 10 21 16 logplot.png|200px]]
+
[[PAA Selenium/Soil Experiments]]
  
The details of the calibration along with the constants found from a linear fit of temperature vs. voltage can be found in the page below.
+
[[LB Se PAA Horse Feed Experiment]]
  
[[Calibration 10-21-16 Det D]]
+
==Background Signals==
[[Calibration 10-28-16 Det A]]
+
[[PAA_BackGrd_Det_A]]
 
 
[[File:Soil Se Overlay.png|200px]]
 
[[File:Background Se Overlay.png|200px]]
 
  
 
==Nickel Normalization==
 
==Nickel Normalization==
 
[[LB PAA Nickel Investigation]]
 
[[LB PAA Nickel Investigation]]
 
==Chlorine==
 
 
It looks like Cl-35 is abundant as you see photon energies of 146 keV and 2127 keV (you can barely see 1176 keV) from Cl-34's decay (neutron knocked out of Cl-35).
 
 
The half life is 32 minutes.
 
 
Should check the half life from the run AccOnAlInDetASe-AinDetD_001.root using the calibration
 
 
MPA->Draw("0.18063+0.960133*evt.Chan>> SeRun_008(8000,0.5,8000.5)","evt.ADCid==3");
 
 
== Irradiation of Horse Mineral Supplement==
 
 
Below is the EMSL report for the horse feed sample.
 
https://wiki.iac.isu.edu/index.php/File:EMSL_Report_Horse_Feed.pdf
 
 
=== Chlorine is a dominant signal===
 
 
 
First, look at the peak around 146 keV
 
[[File:146_keV.png | 200 px]]
 
 
Next I plotted the counts as a function of time to get an exponentially decaying graph. When doing an exponential fit here, the parameter "b" given by root will be the decay constant.
 
 
[[ File:Chlorine.png | 200 px]]
 
 
Root gives a half life of 32.9508 +/- 0.01 minutes
 
 
 
Now do the same for the 2127 keV line
 
[[File:2127_keV.png | 200 px]]
 
 
Here are the counts plotted as a function of time
 
[[File:2127.png | 200 px ]]
 
 
Root gives a half life of 35.3962 +/- 0.2 minutes
 
 
=== Potassium is a potential signal ===
 
 
Looking at the spectrum for the fast irradiation sample, there are 2 prominent lines that could be from 38-K. The mechanism would be a single neutron knockout from a stable 39-K nucleus. The two most dominant energies of the three for 38-K are 2167 keV and 3936 keV and the half life is 7.63 minutes. Below is a fit to the energy spectrum histogram
 
 
[[File:2168_peak.png | 200 px]]
 
 
Now check the half life
 
 
 
[[File:2167.png | 200 px]]
 
 
Root gives a half life of 8.03 +/- 0.02 minutes
 
 
Next check the 3936 peak
 
 
[[File: 3937_Peak.png | 200 px ]]
 
 
and check the half life
 
 
[[File: 3936_keV_halflife.png | 200 px ]]
 
 
Root gives a value for b = - 1.14372x10^(-3), which in turn gives a half life of 10.1 minutes
 
 
It seems very possible that 38-K could be in the sample of horse feed.
 
  
 
== First Observation of Se lines==
 
== First Observation of Se lines==
Line 157: Line 91:
  
 
== MDA and Se mass Calculations ==
 
== MDA and Se mass Calculations ==
To find the mass of the selenium in the irradiated horse feed sample, we need some masses and volumes of the horse feed. A vial containing 20mL of regular horse feed was massed. The mass of the vial was 13.6406g and the total mass of the vial and the horse feed was 31.8504g. This means the mass of the horse feed is <math>31.8504g - 13.6406g = 18.2098g</math>. Since this mass is in a 20mL = 0.02L container, the density of the horse feed (assuming the mass difference between the non-irradiated and the irradiated horse feed is negligible) is
+
[[LB MDA/Se Mass Calculations]]
 
 
<math>\frac{18.2098g}{0.02L} = 910.49 \frac{g}{L}</math>.
 
 
 
Now for the irradiated horse feed the mass of the container is 25.0259g and the total mass of the container and the sample is 43.7529g. The mass of the sample then is 43.7529g - 25.0259g = 18.727g. Now using the density found before we can find the volume of the irradiated horse feed within the container.
 
 
 
<math>\rho = 910.49\frac{g}{L} = \frac{18.727}{V},  V = \frac{18.727g}{910.49 \frac {g}{L}} = 0.0206L.</math>
 
 
 
The EMSL report says that there are <math>0.56\frac{mg}{L}</math> in the horse feed, so the mass of the selenium in the horse feed sample is
 
 
 
<math>0.56\frac{mg}{L}\times 0.0206L = 0.011536mg</math>.
 
 
 
 
 
  
Each of the calibration runs were used at position C in detector D. Below is the runlist for the isotopes used. The intervals used were (117:127) and (272:282) respectively.
+
==IAC Detector Efficiencies ==
  
{| border="3"  cellpadding="5" cellspacing="0"
+
[[LB PAA IAC Detector Efficiencies]]
|  Source || Serial # || Reference Date || Activity || Start || Stop || Live 
 
|-
 
| Co-57 || 129735 || 07/01/08 || 1.074 micro Ci || 16:17:37 || 16:27 || 601.10
 
|-
 
| Ba-133 || 129790 || 07/01/08 || 1.188 micro Ci || 16:29:14 || 16:32 || 208.259
 
|-
 
|}
 
  
For the Co-57, the activity as of 09/07/16 is 0.0005 microCi and the intensity of the 122.3 keV line is 85.6%
+
==IAC Detector Calibrations==
:= <math>\left (0.856 \right )\left ( 0.0005 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)= 15.84 Hz </math> for the 122.3 line
 
  
 +
[[LB April DetB DetA Calibration]]
  
For the Ba-133, the activity as of 09/07/16 is 0.69 microCi and the intensity of the 277.05 keV line is 7.164%
+
==Runlists==
:= <math>\left (0.07164 \right )\left ( 0.69 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)= 1828.97 Hz </math> for the 277.05 line
+
[[LB PAA Runlist 4/01/16 - 06/02/16]]
  
 +
[[LB March 2017 Runlist]]
  
{| border="3"  cellpadding="5" cellspacing="0"
+
[[LB_May_2017_Irradiation_Day]]
|  Run || Source || Energy (keV) || Expected Rate (Hz) || HpGe Rate (Hz) || HpGe Det D Efficiency (%) 
 
|-
 
| Eff_C_Co_57.root || Co-57 || 122.3 || 15.84 || 0.4526 - 0.2144 || 1.5
 
|-
 
|Eff_C_Ba_133.root || Ba-133 || 277.05 || 1828.97 || 20.58 - 0.07641 || 1.12
 
|}
 
 
 
Now that the efficiency has been found, we must find the background rate to find the MDA. To find the background rate I used ROOT and plotted the energy spectra for Se_B_005 and HorseFeed_NoIrr. The windows of interest are the same as above. Each run's time was cut down to 1 hour.
 
 
 
First I will find the MDA for the window from (117:127). In Se_B_005, the activity was found to be 0.8433 HZ and in the HorseFeed_NoIrr the activity was found to be 0.2133 Hz, which gives a background rate of 0.63 Hz -> 37.6 cpm.
 
 
 
Now we can compute the MDA using this reference https://wiki.iac.isu.edu/index.php/File:Nwsltr-43re.pdf
 
 
 
I found the MDA to be [(2.71 + 4.65*(37.6 * 60)^1/2]/(60*0.015) = 249.1 dpm
 
 
 
Now I will find the MDA for the window from (272:282). In Se_B_005, the activity was found to be 0.7408 Hz and in HorseFeed_NoIrr the activity was found to be 0.08278. This means that the background activity is 0.66 Hz -> 39.48 cpm.
 
 
 
Now we can compute the MDA = [(2.71 + 4.65*(39.48 * 60)^1/2]/(60*0.012) = 318.1 dpm
 
 
 
== Detector Efficiency ==
 
 
 
Below is the runlist for finding the efficiency of the detector at position R
 
 
 
 
 
{| border="3"  cellpadding="5" cellspacing="0"
 
|  Source || Serial # || Reference Date || Activity || Start || Stop || Live 
 
|-
 
| Na-22  || 129743 || 7-01-08 || 9.427 microCi || 15:49 || 16:19 || 1796.803 
 
|-
 
| Cs-137 || 129793 || 7-01-08 || 1.006 microCi || 14:25 || 14:56 || 1879.606
 
|-
 
| Mn-54 || 129807 || 7-01-08 || 11.77 microCi || 15:00 || 15:30 || 1793.420
 
|-
 
| Co-60 || 129740 || 7-01-08 || 10.42 microCi || 15:33 || 15:43 || 569.725
 
|-
 
|}
 
 
 
Below are the theoretical calculations for the theoretical decay frequencies
 
 
 
Na-22, 9.427micro Ci on July 1, 2008, half life 2.602 +/- 0.002 years, 99.937% for 1274.52 and 178.8 for 511 line , activity in March 31, 2016 =1.196micro Ci
 
:= <math>\left (0.99937 \right )\left ( 1.196 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)= 44,224 Hz </math> for the 1274 line
 
 
 
:= <math>\left (1.788 \right )\left ( 1.196 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)=  79122.6 Hz </math> for the 511 line
 
 
 
Cs-137, 661.660 line, 85.21% * 1.066micro Ci on July 1, 2008, half life 30.0 +/- 0.2 yrs, March 31, 2016 activity = 0.891micro Ci expected rate for 661 line
 
 
 
:= <math>\left (0.8521 \right )\left ( 0.891 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)= 28091.2 Hz </math>
 
 
 
Mn-54, 11.77 microCi  on July 1, 2008, half life =312.20 +/- 0.07 days, 99.975% intensity on 834.826 , March 31, 2016 activity =0.02328micro Ci
 
 
 
:= <math>\left (0.99975 \right )\left ( 0.02328 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)=  861.1 Hz </math> for the 834 line
 
 
 
 
 
Co-60, 10.42micro Ci July 1, 2008, half life 5.271 +/- 0.001 years, 99.0 % for 1173.237 and 99.9824 % for 1332.501, March 31, 2016 activity=3.759micro Ci
 
 
 
 
 
:= <math>\left (0.99 \right )\left ( 3.759 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)=  137692.17 Hz </math> for the 1173 line
 
 
 
 
 
:= <math>\left (0.999824 \right )\left ( 3.759 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)=  139058.52 Hz </math> for the 1332 line
 
 
 
 
 
Below is a table where the actual efficiency will be calculated for position R (farthest position).
 
 
 
{| border="3"  cellpadding="5" cellspacing="0"
 
|  Run || Source || Energy (keV) || Expected Rate (Hz) || HpGe Rate (Hz) || HpGe Det D Efficiency (%) 
 
|-
 
| Eff_003  || Na-22 || 511 || 79122.6 || (506:516) (4.309-0.065=4.244) || 0.005
 
|-
 
| Eff_005 || Cs-137 || 661.657 || 28091.2 ||(657:666)(1.105-0.02281=1.0821) ||0.004
 
|-
 
| Eff_006 || Mn-54 || 834.848  || 861.1 ||(830:839)(0.04037-0.009123=0.031247)||0.004
 
|-
 
| Eff_007 || Co-60 ||  1173.228 || 137692 ||(1164:1182)(3.686-0.01939=3.67)||0.003
 
|-
 
| Eff_003 || Na-22 || 1274.537 || 44224 ||(1270:1279) (1.073-0.0057=1.0673)||0.002
 
|-
 
| Eff_007 || Co-60 ||  1332.492 || 139058.52 ||(1328:1337)(3.283-0.05702=3.22598)|| 0.002
 
|}
 
 
 
Below is a runlist for position k
 
 
 
{| border="3"  cellpadding="5" cellspacing="0"
 
|  Source || Serial # || Reference Date || Activity || Start || Stop || Live 
 
|-
 
| Na-22  || 129743 || 7-01-08 || 9.427 microCi || 14:54 || 15:01 || 434.087 
 
|-
 
| Cs-137 || 129793 || 7-01-08 || 1.006 microCi || 15:48 || 15:55 || 413.925
 
|-
 
| Mn-54 || 129807 || 7-01-08 || 11.77 microCi || 15:28 || 15:40 || 705.186
 
|-
 
| Co-60 || 129740 || 7-01-08 || 10.42 microCi || 15:41 || 15:47 || 346.092
 
|-
 
|}
 
 
 
Below are the theoretical decay frequencies
 
 
 
Na-22, 9.427micro Ci on July 1, 2008, half life 2.602 +/- 0.002 years, 99.937% for 1274.52 and 178.8 for 511 line , activity in April 14, 2016 =1.183micro Ci
 
:= <math>\left (0.99937 \right )\left ( 1.183 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)= 43743.4 Hz </math> for the 1274 line
 
 
 
:= <math>\left (1.788 \right )\left ( 1.183 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)= 78262.5  Hz </math> for the 511 line
 
 
 
Cs-137, 661.660 line, 85.21% * 1.066micro Ci on July 1, 2008, half life 30.0 +/- 0.2 yrs, April 14, 2016 activity =0.890 micro Ci expected rate for 661 line
 
 
 
:= <math>\left (0.8521 \right )\left ( 0.890 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)= 28059.7 Hz </math>
 
 
 
Mn-54, 11.77 on July 1, 2008, half life =312.20 +/- 0.07 days, 99.975% intensity on 834.826 , April 14, 2016 activity =0.02251micro Ci
 
 
 
:= <math>\left (0.99975 \right )\left ( 0.02251 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)=  830.79 Hz </math> for the 834 line
 
 
 
 
 
Co-60, 10.42micro Ci July 1, 2008, half life 5.271 +/- 0.001 years, 99.0 % for 1173.237 and 99.9824 % for 1332.501, April 14, 2016 activity=3.74micro Ci
 
 
 
 
 
:= <math>\left (0.99 \right )\left ( 3.74 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)=  136996.2 Hz </math> for the 1173 line
 
 
 
 
 
:= <math>\left (0.999824 \right )\left ( 3.74 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)=  138355.6 Hz </math> for the 1332 line
 
 
 
Below are the actual efficiencies for position k
 
 
 
{| border="3"  cellpadding="5" cellspacing="0"
 
|  Run || Source || Energy (keV) || Expected Rate (Hz) || HpGe Rate (Hz) || HpGe Det D Efficiency (%) 
 
|-
 
| Eff_k_002  || Na-22 || 511 || 79122.6 || (506:516)(49.21-0.6272=48.58) || 0.06
 
|-
 
| Eff_k_006 || Cs-137 || 661.657 || 28091.2 ||(657:666)(12.86-0.02281=12.837) ||0.05
 
|-
 
| Eff_k_004 || Mn-54 || 834.848  || 861.1 ||(830:839)(0.3204-0.009123=0.311)||0.04
 
|-
 
| Eff_k_005 || Co-60 ||  1173.228 || 137692 ||(1164:1182)(42.39-0.02053=42.369)||0.03
 
|-
 
| Eff_k_002 || Na-22 || 1274.537 || 44224 ||(1270:1279) (12.53-0.005702)=12.52||0.03
 
|-
 
| Eff_k_005 || Co-60 ||  1332.492 || 139058.52 ||(1328:1337)(35.94-0.005072)|| 0.03
 
|}
 
 
 
Below is a runlist for position C
 
 
 
{| border="3"  cellpadding="5" cellspacing="0"
 
|  Source || Serial # || Reference Date || Activity || Start || Stop || Live 
 
|-
 
| Na-22  || 129742 || 7-01-08 || 1.146 microCi || 12:55 || 12:57 || 129.782 
 
|-
 
| Cs-137 || 129793 || 7-01-08 || 1.006 microCi || 13:02 || 13:04 || 123.818
 
|-
 
| Mn-54 || 129806 || 7-01-08 || 1.226 microCi || 13:11 || 13:21 || 613.754
 
|-
 
| Co-60 || 129739 || 7-01-08 || 1.082 microCi || 13:08 || 13:09 || 103.599
 
|-
 
|}
 
 
 
Below are the calculations for the theoretical frequencies
 
 
 
Na-22, 9.427micro Ci on July 1, 2008, half life 2.602 +/- 0.002 years, 99.937% for 1274.52 and 178.8 for 511 line , activity in May 5, 2016 =1.196micro Ci
 
:= <math>\left (0.99937 \right )\left ( 0.14 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)= 5176.7 Hz </math> for the 1274 line
 
 
 
:= <math>\left (1.788 \right )\left ( 0.14 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)=  9261.8 Hz </math> for the 511 line
 
 
 
Cs-137, 661.660 line, 85.21% * 1.066micro Ci on July 1, 2008, half life 30.0 +/- 0.2 yrs, May 5, 2016 activity = 0.89micro Ci expected rate for 661 line
 
 
 
:= <math>\left (0.8521 \right )\left ( 0.891 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)= 28059.7 Hz </math>
 
 
 
Mn-54, 1.226 microCi on July 1, 2008, half life =312.20 +/- 0.07 days, 99.975% intensity on 834.826 , May 5, 2016 activity =0.002micro Ci
 
 
 
:= <math>\left (0.99975 \right )\left ( 0.002 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)=  73.98 Hz </math> for the 834 line
 
 
 
 
 
Co-60, 1.082micro Ci July 1, 2008, half life 5.271 +/- 0.001 years, 99.0 % for 1173.237 and 99.9824 % for 1332.501, May 5, 2016 activity=0.39micro Ci
 
 
 
 
 
:= <math>\left (0.99 \right )\left ( 0.39 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)=  14285.7 Hz </math> for the 1173 line
 
 
 
 
 
:= <math>\left (0.999824 \right )\left ( 0.39 \times 10^{-6} \mbox{Ci} \right) \left (\frac{ (3.7 \times 10^{10} \mbox{Hz}}{\mbox{Ci}} \right)=  14427.5 Hz </math> for the 1332 line
 
 
 
Below is a table with the calculated efficiencies
 
 
 
{| border="3"  cellpadding="5" cellspacing="0"
 
|  Run || Source || Energy (keV) || Expected Rate (Hz) || HpGe Rate (Hz) || HpGe Det D Efficiency (%) 
 
|-
 
| Eff_C_001  || Na-22 || 511 || 9261.8 || (506:516) (45.65-0.065=45.585) || 0.5
 
|-
 
| Eff_C_002 || Cs-137 || 661.657 || 28059.7 ||(657:666)(101.7-0.02281=101.67) || 0.4
 
|-
 
| Eff_C_004 || Mn-54 || 834.848  || 73.98 ||(830:839)(0.2704-0.009123=0.2612)||0.4
 
|-
 
| Eff_C_003 || Co-60 ||  1173 || 14285.7 ||(1164:1182)(34.24-0.01939=34.22)||0.2
 
|-
 
| Eff_C_001 || Na-22 || 1274.537 || 5176.7 ||(1270:1279) (11.15-0.0057=11.14)||0.2
 
|-
 
| Eff_C_003 || Co-60 ||  1332.492 || 14427.5 ||(1328:1337)(28.05-0.05702=27.99)|| 0.2
 
|}
 
 
 
=Run List=
 
 
 
{| border="3"  cellpadding="5" cellspacing="0"
 
|  Date || Time elapsed (Seconds) || Sample || Document Title || Start || Stop || Real || Live || Position 
 
|-
 
| 04-01-16  || 2.16x10^6 || Se_B || Se_B_002 || 15:55 || 09:15 || 235989.882 || 235687.660 || k
 
|-
 
| 04-06-16 || 2.592x10^6 || Se_B || Se_B_003 || 12:57 || Interrupted || computer || crash || k
 
|-
 
| 04-14-16 || 3.283x10^6 || Se_B  || Se_B_005 || 15:57 || 09:37 || 63581.784 || 63509.895||k
 
|-
 
| 04-15-16 || 3.37x10^6 ||  Sample D || Sample_D_001 || 14:47 || 08:23 || 236172.264 || 236173.271||k
 
|-
 
| 04-19-16 || 3.715x10^6 || Sample B || Sample_B_001 ||15:31||15:18 || 85634.862 || 85624.090||k
 
|-
 
| 4-20-16 || 3.802x10^6 ||  Sample C || Sample_C_001 ||15:22||10:19 || 68253.774 || 68232.238||k
 
|-
 
| 04-21-16 || 3.888x10^6 || Sample A || Sample_A_001 || 10:22 || 10:37 || 87292.409 || 87268.114||k
 
|-
 
|04-25-16 || 4.234x10^6 || Sample E || Sample_E_001 || 11:36 || 10:03 || 80822.406 || 80795.679||k
 
|-
 
|04-26-16 || 4.32x10^6 || Se_B || Se_B_008 || 10:06 || 10:29 || 87784.755 || 87664.070 || k
 
|-
 
|05-05-16 || 5.098x10^6 || Sample A || Sample_A_002 || 13:31 || 14:30 || 3605.507 || 3602.925 || c
 
|-
 
|05-05-16 || 5.098x10^6 || Sample B || Sample_B_002 || 14:34 || 15:26 || 3114.244 || 3112.620 || c
 
|-
 
|05-05-16 || 5.098x10^6 || Sample C || Sample_C_002 || 15:28 || 10:57 || 70124.788 || 70044.470 || c
 
|-
 
| 05-06-16 ||5.184x10^6|| Sample D || Sample_D_002 || 10:59 || 15:34 || 16516.898 || 16512.570||c
 
|-
 
|05-06-16 || 5.184x10^6 || Sample E || Sample_E_004 || 15:37 || 16:18 || 261654.225 || 261344.308 || c
 
|-
 
|05-09-16 || 5.443x10^6 || Se B|| Se_B_012 || 16:20 || 11:08||67157.101||66660.298 || c
 
|-
 
|05-10-16 || 5.5296x10^6 || Sample A || Sample_A_004 || 11:03 || 15:19 || 15379.475 || 15363.017 || c
 
|-
 
|05-10-16 || 5.5296x10^6 || Sample B || Sample_B_004 || 15:22:04 || 11:43 || 73256.181 || 73220.324 || c
 
|-
 
|05-16-16 || 6.048x10^6 || Sample C || Sample_C_004 || 16:33 || 08:19 || 56758.980 || 56711.121 || c
 
|-
 
|05-18-16 || 6.2208x10^6 || Sample D || Sample_D_006 || 08:44:21 || 14:05 || 19271.829 || 19266.929 || c
 
|-
 
|05-18-16 || 6.2208x10^6 || Sample E || Sample_E_006 || 14:08 || 08:06 || 151108.258 || 150955.915 || c
 
|-
 
|05-20-16 || 6.3936x10^6 || Se_B || Se_B_014 || 08:08:47 || 08:44 || 261353.204 || 259621.655 || c
 
|-
 
|05-23-16 || 6.6528x10^6 || Sample A || Sample_A_006 || 08:48 || 13:49 || 18103.004 || 18091.523 || c
 
|-
 
|05-23-16 || 6.6528x10^6 || Sample B || Sample_B_006 || 13:52 || 13:24 || 84763.938 || 84696.083 || c
 
|-
 
|05-24-16 || 6.7392x10^6 || Sample C || Sample_C_006 || 13:28:28 || 10:28 || 75571.716 || 75502.871 || c
 
|-
 
|05-31-16 || 7.344x10^6 || Sample B || Sample_B_008 || 08:57:22 || 08:55 || 86282.861 || 86237.392 || c
 
|-
 
|06-01-16 || 7.4304x10^6 || Sample C || Sample_C_008 || 08:58:39 || 13:31 || 102739.504 || 102647.471 || c
 
|-
 
|06-02-16 || 7.5168x10^6 || Sample D || Sample_D_010 || 13:33 || 08:41 || 68915.044 || 68898.246 || c
 
|}
 
 
 
==[[SeRun_01-11-16]]==
 
==[[LB March 2017 Runlist]]==
 
 
 
==[[SeRun_03-07-16]]==
 
 
 
==[[SeRun_02-13-17]]==
 
 
 
==[[LB IAC Radiator Specs]]==
 
 
 
==[[LB Rotating Sample Holder]]==
 
==[[LB April DetB DetA Calibration]]==
 
  
 
=Data Analysis=
 
=Data Analysis=
  
==Pure Se Sample==
 
 
===Observed lines===
 
  
 
[[LB_Feb2017_Se_Investigations]]
 
[[LB_Feb2017_Se_Investigations]]
 
===Estimate of Se-79 activity===
 
 
Using known efficiency to extrapolate initial activity
 
 
Use ratio with Nickel foil rate
 
 
== Se spiked in Soil==
 
 
 
 
Detection limit of Se in Soil
 
  
 
=References=
 
=References=

Latest revision as of 22:10, 17 May 2019

Using PAA ro measure Selenium concentrations.

According to Krouse<ref name="Krous1962"> H.R. Krause and H.G. Thode,"Thermodynamic Properties and Geochemistry of Iosotopic Compounds of Selenium",.Can. J. Chem., vol 40, pg 367</ref> , the fractional concentration of Se-82/Se-76 in plant material is observed to be less than from primordial (meteoric) concentrations by as much as 1.2%. Anaerobic bacteria are known to reduce selenates and senelites in biological systems. This may be the reason plant material has fractionation of selenium isotopes. They also observe excess concentrations of up to 0.4% in soil.


Plant material appears to detect environmental selenium.

Can one use plant material to measure the provenance of selenium?

Se_Overview_PrevMeas

As shown in the Figure below, the Se-82/Se-76 ratio varies from -1.2% to +0.2% for plant materials but remains relatively constant for other materials. The variations in plant material has been described as being due to differences in the bacteria residing in the plant. The question to investigate is whether or not these variations in the concentration can be used to determine the provenance of the sample.



Krouse Fig 1.png

Below is a table listing the natural abundances of Selenium

Natural abundance of selenium

Isotope Abundance
Se-74 0.86%
Se-76 9.23%
Se-77 7.60%
Se-78 23.69%
Se-80 49.80%
Se-82 8.82%

Below are possible PAA reactions that may be used to observe specific Se isotopes

Reaction Half-life Relative activity Gamma-rays, keV (BR)
Se-74(gamma,n)Se-73 7.1 h 1.5E-1 361 (100)
Se-74(gamma,n)Se-73m 39 m 3.2 402 (4)
Se-74(gamma,np)As-72 26 h 1.0E-3 834 (100)
Se-76(gamma,n)Se-75 120 d 1.3E-2 265(29)
Se-77(gamma,p)As-76 26.4 h 4.4E-2 559(44)
Se-78(gamma,p)As-77 38.8 h 8.6E-2 239(2)
Se-80(gamma,n)Se-79m 3.9 m 5.9 96(10)
Se-80(gamma,np)As-78 1.5 h 2.2E-2 614(54)
Se-80(gamma,p)As-79 8.2 m 1.3 96(9)
Se-80(gamma,[math]a[/math]p)Ge-75 83 m 2.8E-1 265(11)

Can one perform PAA measurements of Se-82 and Se-76?

Se_PAA_Reactions

Experiments

PAA_Selenium_ActivityCalc

PAA Selenium/Soil Experiments

LB Se PAA Horse Feed Experiment

Background Signals

PAA_BackGrd_Det_A

Nickel Normalization

LB PAA Nickel Investigation

First Observation of Se lines

Using the 44 Machine at 7 kW power and 44 meV incident electron energy to produce a bremsstrahlung spectrum with a mean energy of 15 meV.


All runs lasting less than 214 seconds have time stamp that gives real time if you divide by clock frequency of 20 MHz.  The first 32 bits are used for a real time measurement.


MDA and Se mass Calculations

LB MDA/Se Mass Calculations

IAC Detector Efficiencies

LB PAA IAC Detector Efficiencies

IAC Detector Calibrations

LB April DetB DetA Calibration

Runlists

LB PAA Runlist 4/01/16 - 06/02/16

LB March 2017 Runlist

LB_May_2017_Irradiation_Day

Data Analysis

LB_Feb2017_Se_Investigations

References

User_talk:Brenleyt


<references/>

File:Krouse CanJournChem 40 1962 p367.pdf

Goryachev, A. M., & Zalesnyy, G. N. (n.d.). The studying of the photoneutron reactions cross sections in the region of the giant dipole resonance in zinc, germanium, selenium, and strontium isotopes. Retrieved September 16, 2016, from http://www-nds.indcentre.org.in/exfor/servlet/X4sSearch5?EntryID=220070

Goryachev, B. I., Ishkhanov, B. S., Kapitonov, I. M., Piskarev, I. M., Piskarev, V. G., & Piskarev, O. P. (n.d.). Giant Dipole Resonance on Ni Isotopes. Retrieved October 26, 2016, from http://www-nds.indcentre.org.in/exfor/servlet/X4sGetSubent?reqx=119235&subID=220597006&plus=1


Handbook on Photonuclear data for applications, cross sections, and spectra. (2000, October). Retrieved November 4, 2016, from http://www-pub.iaea.org/MTCD/Publications/PDF/te_1178_prn.pdf

MSDS

Selenium shot, amorphous, 2-6 mm, Puratronic, 99.999% Alfa Aesar product # 10603 File:AlphaAesarSelenium MDSD.pdf

Informative links

http://www.deq.idaho.gov/regional-offices-issues/pocatello/southeast-idaho-phosphate-mining/southeast-idaho-selenium-investigations/

https://inldigitallibrary.inl.gov/sti/3169894.pdf

http://giscenter.isu.edu/research/Techpg/sisp/index.htm


PAA_Research