Difference between revisions of "NI488.2"

From New IAC Wiki
Jump to navigation Jump to search
(Created page with '==Add GPIB-ENET/100 Wizard=== ''Device numbers can be changed later using Measurement & Automation Explorer'' Standard numbers:')
 
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
==Add GPIB-ENET/100 Wizard===
+
==Add GPIB-ENET/100 Wizard==
  
  
Line 5: Line 5:
  
 
Standard numbers:
 
Standard numbers:
 +
 +
 +
==Interactive control==
 +
Set up the GPIB:
 +
gpib1: ibdev
 +
    enter board index: 1
 +
    enter primary address: 16
 +
    enter secondary address: 0
 +
    enter timeout: 10
 +
    enter 'EOI on last byte' flag: 1
 +
    enter end-of-string mode/byte: 0
 +
Enable remote control of MC2000:
 +
ud0: ibwrt "E"
 +
[0100]  ( cmpl )
 +
count:  1
 +
Query the buffer status:
 +
ud0: ibwrt "B"
 +
[0100]  ( cmpl )
 +
count:  1
 +
Read the buffer status:
 +
ud0: ibrd 60
 +
[2100]  ( end cmpl )
 +
count:  3
 +
2a  52  0d                              * R .

Latest revision as of 01:49, 3 March 2010

Add GPIB-ENET/100 Wizard

Device numbers can be changed later using Measurement & Automation Explorer

Standard numbers:


Interactive control

Set up the GPIB:

gpib1: ibdev
   enter board index: 1
   enter primary address: 16
   enter secondary address: 0
   enter timeout: 10
   enter 'EOI on last byte' flag: 1
   enter end-of-string mode/byte: 0

Enable remote control of MC2000:

ud0: ibwrt "E"
[0100]   ( cmpl )
count:  1

Query the buffer status:

ud0: ibwrt "B"
[0100]   ( cmpl )
count:  1

Read the buffer status:

ud0: ibrd 60
[2100]   ( end cmpl )
count:  3
2a  52  0d                              * R .