Mylar Linear Small Deflection
Revision as of 11:50, 9 June 2008 by Oborn (talk | contribs) (→Editing Mylar Linear Small Deflection)
Mylar Linear Small Deflection
Shapes Considered for calculating the Percentage error in results
- Square with rectangular approach of 100mm x 100mm with a thickness of 0.0254mm
- Circle with a radius of 50mm and thickness of 0.0254mm
- Actual Size of the sheet with 0.254mm Thick
Square Section
Ansys Analysis
Total Deformation observed in ANSYS is 1016.6 mm and by hand calculation it is observed to be 1108.6mm
=Hand Calculations
Circular Section
Ansys Analysis
The Maximum total deformation is observed to be 789.93mm
=Hand Calculations
