MiniPrototype CAEN V792 Calibration

From New IAC Wiki
Revision as of 17:08, 11 December 2007 by Oborn (talk | contribs) (→‎12/11/07)
Jump to navigation Jump to search

I injected a signal into the Drift chamber preamps and read it out using the CAEN V792 ADC.

12/11/07

Here is a scope picture of the signal coming out of the preamp and going into the ADC (Blue) as well as the integration gate used. The signal is about 50 mv as shown below. There is a 2 mv peak to peak noise level which has structure.

ADC V792 Calib a 12-11-07.jpg ADC V792 Calib a noise 12-11-07.jpg ADC V792 Calib a noise 2 12-11-07.jpg

The data was then collected using coda and recorded as run #189. A histogram of channel #1 is shown below.


200 px