Difference between revisions of "MiniPrototype CAEN V792 Calibration"
Jump to navigation
Jump to search
Line 3: | Line 3: | ||
=12/11/07= | =12/11/07= | ||
− | Here is a scope picture of the signal coming out of the preamp and going into the ADC (Blue) as well as the integration gate used. The signal is about | + | Here is a scope picture of the signal coming out of the preamp and going into the ADC (Blue) as well as the integration gate used. The signal is about 7 mv as shown below. There is a 2 mv peak to peak noise level which has structure. |
[[Image:ADC_V792_Calib_a_12-11-07.jpg | 200 px]] | [[Image:ADC_V792_Calib_a_12-11-07.jpg | 200 px]] |
Revision as of 17:08, 11 December 2007
I injected a signal into the Drift chamber preamps and read it out using the CAEN V792 ADC.
12/11/07
Here is a scope picture of the signal coming out of the preamp and going into the ADC (Blue) as well as the integration gate used. The signal is about 7 mv as shown below. There is a 2 mv peak to peak noise level which has structure.
The data was then collected using coda and recorded as run #189. A histogram of channel #1 is shown below.