Difference between revisions of "MiniPrototype CAEN V792 Calibration"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
=12/11/07= | =12/11/07= | ||
| − | Here is a scope picture of the signal coming out of the preamp and going into the ADC (Blue) as well as the integration gate used. | + | Here is a scope picture of the signal coming out of the preamp and going into the ADC (Blue) as well as the integration gate used. The signal is about 50 mv as shown below. There is a 2 mv peak to peak noise level which has structure. |
[[Image:ADC_V792_Calib_a_12-11-07.jpg | 200 px]] | [[Image:ADC_V792_Calib_a_12-11-07.jpg | 200 px]] | ||
Revision as of 17:08, 11 December 2007
I injected a signal into the Drift chamber preamps and read it out using the CAEN V792 ADC.
12/11/07
Here is a scope picture of the signal coming out of the preamp and going into the ADC (Blue) as well as the integration gate used. The signal is about 50 mv as shown below. There is a 2 mv peak to peak noise level which has structure.
The data was then collected using coda and recorded as run #189. A histogram of channel #1 is shown below.
