Linac Run Plan April 2018, Dr. McNulty

From New IAC Wiki
Jump to navigation Jump to search

Date

85 useable OSLs

Machine: 24b Linac

Beam Energy: 8 MeV

Rep Rate: Max (180Hz)?

Shot # Start Time End Time Number of OSLs Distance to end of beampipe Beam Current Aluminum Brick Background Subtracted PMT Counts
1 7am 7:15am 1 25cm amps Out
2 7:20am 7:35am 1 25cm amps Out
3 7:40am 7:55am 1 25cm amps Out
4 8:00 8:20 1 25cm amps Out
5 1 25cm amps Out
6 1 25cm amps In
7 1 25cm amps In
8 1 25cm amps In
9 1 25cm amps In
10 1 25cm amps In
11 10 25cm amps Out
12 10 25cm amps Out
13 10 25cm amps Out
14 10 25cm amps Out
15 10 25cm amps Out
16 10 25cm amps In
17 15 25cm amps In

Calculations

Assuming [math]100\frac{mA}{pulse}[/math] and a pulse width of [math]100ns[/math]

Then [math]100\frac{mA}{pulse}=100\frac{mC}{s*pulse}=0.1\frac{C}{s*pulse}[/math]

[math]0.1\frac{C}{s*pulse}(100ns)=10*10^{-9}\frac{C}{pulse}[/math]

[math]10*10^{-9}\frac{C}{pulse}*\frac{1\ e-}{1.602*10^{-19}}=6.2422*10^{10}\frac{e-}{pulse}[/math]

OSL Crystal density[math]=3.9698\frac{g}{cm^{3}}[/math]

Mass of a single OSL crystal: [math](\pi(0.501)^{2}*(0.03))*(3.9698)=0.0234777g[/math]

Absorbed Dose Information

Quartz

[math]\frac{1}{1000}[/math] of a pulse. ~62mil e- simulated, ~62bil e- per pulse. With beam parameters given above.

Deposited Energy: [math]4.71875*10^{8} MeV[/math]

Quartz density[math]=2.32\frac{g}{cm^{3}}[/math]

Mass of Quartz used in simulation: [math](\pi(1.27)^{2}*(2.54))*(2.32)=29.8593g[/math]

Scaling deposited energy by 1000 to account for only shooting a 1000th of a pulse, the deposited energy becomes [math]4.71875*10^{12} MeV[/math]


Thesis