LabSkills TF

From New IAC Wiki
Revision as of 19:59, 8 January 2011 by Foretony (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  1. using a voltmeter
    1. Measure the voltage of a D-cell battery
    2. Open the voltmeter an replace its fuse
  2. using an external power supply
    1. setting Current and voltage limits
  3. using a pules generator
    1. setup a frequency and shape
  4. how to use a scope
    1. what is a trigger and a trigger level
    2. setting time and voltage scales
    3. observe the output of the pulse generator on a scope, play with frequency and amplitude
  5. using a Breadboard
    1. general principle of use
    2. Bread board layout, which holes are connected together
    3. suggestions on use
  6. how to solder
    1. what is a cold solder joint