Difference between revisions of "LabSkills TF"

From New IAC Wiki
Jump to navigation Jump to search
(Created page with ' #replacing fuse in voltmeter')
 
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
+
#using a voltmeter
#replacing fuse in voltmeter
+
##Measure the voltage of a D-cell battery
 +
##Open the voltmeter an replace its fuse
 +
#using an external power supply
 +
##setting Current and voltage limits
 +
#using a pules generator
 +
##setup a frequency and shape
 +
#how to use a scope
 +
##what is a trigger and a trigger level
 +
## setting time and voltage scales
 +
##observe the output of the pulse generator on a scope, play with frequency and amplitude
 +
#using a Breadboard
 +
## general principle of use
 +
##Bread board layout, which holes are connected together
 +
## suggestions on use
 +
#how to solder
 +
##what is a cold solder joint

Latest revision as of 19:59, 8 January 2011

  1. using a voltmeter
    1. Measure the voltage of a D-cell battery
    2. Open the voltmeter an replace its fuse
  2. using an external power supply
    1. setting Current and voltage limits
  3. using a pules generator
    1. setup a frequency and shape
  4. how to use a scope
    1. what is a trigger and a trigger level
    2. setting time and voltage scales
    3. observe the output of the pulse generator on a scope, play with frequency and amplitude
  5. using a Breadboard
    1. general principle of use
    2. Bread board layout, which holes are connected together
    3. suggestions on use
  6. how to solder
    1. what is a cold solder joint