Difference between revisions of "LB SageBrushWork PostDefense"

From New IAC Wiki
Jump to navigation Jump to search
Line 6: Line 6:
  
 
TTree* tree = MPA;
 
TTree* tree = MPA;
 +
 
MPA->Draw("evt.Chan:evt.Sec>>hist2","evt.ADCid = 1");
 
MPA->Draw("evt.Chan:evt.Sec>>hist2","evt.ADCid = 1");
  
 
which produced the histogram below
 
which produced the histogram below

Revision as of 17:32, 27 August 2018

Time Cuts

The first step in the PAA process is to identify the time cuts used for the split run. This must be done for all samples (50%,10%,0.1%, and 0.04%) Let's do the 50% sample first

50% Sage/Se Mixture Time Cuts

The 50% Se/Sage mixture was measure on Detector B (unshielded, so watch the SNR) on 5/24/17 for a total of 2130.540 seconds. The outer pure witness Se was measure first, and sub-run was roughly 300 seconds for the samples of interest, and 60 seconds for the Co-60 flag. The root command used to draw the timing information was

TTree* tree = MPA;

MPA->Draw("evt.Chan:evt.Sec>>hist2","evt.ADCid = 1");

which produced the histogram below