LB IAC Radiator Specs

From New IAC Wiki
Revision as of 22:32, 8 February 2017 by Brenleyt (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Here is the radiator that will be used during the irradiation. The 7.25" L-Shaped pipes on the side are for water cooling and they are centered through the middle of the radiator and connected at the bend to make a U-shape. The pipe's diameter is 7/16 in. The distance between the 2 pipes is 3.25. The beam exit window is 1/1000 " of titanium, then whatever air is between the titanium and the converter. The titanium disk is 2.5" in diameter. Finally the titanium disk is roughly 3/4 " from the radiator.

The aluminum test tubes are 1mm thick.

Radiator.png

Here are pictures of the radiator and the titanium disk

Image3.jpeg

Image4.jpeg

Image5.jpeg

Image6.jpeg