# K 4-25-08

5 Analysis were carried out as follows.

All of them with Carbon rods, No Hexcel sheet, No mylar sheet. Left hinge was constrained, right hinge was allowed to move along the back Plate length(x-axis) and front face of the nose plate was constrained.

- Wire Loads are 1512N on all the 4 hole areas

# Case 1. No gravity

Figure 4.25.08.1: Total Deformation in analysis Case 1 |

The remaining pictures with X, Y, Z Deformations are available atRemaining pictures of Case_1
The analysis report is available at File:4 25 08 1.pdf

# Case 2. Ideal case of gravity

Figure 4.25.08.2: Total Deformation in analysis Case 2 |

The remaining pictures with X, Y, Z Deformations are available atRemaining pictures of Case_2
The analysis report is available at File:4 25 08 2.pdf

# Case 3. Chamber 3

Figure 4.25.08.3: Total Deformation in analysis Case 3 |

The remaining pictures with X, Y, Z Deformations are available atRemaining pictures of Case_3
The analysis report is available at File:4 25 08 3.pdf

# Case 4. Chamber 4

Figure 4.25.08.4: Total Deformation in analysis Case 4 |

The remaining pictures with X, Y, Z Deformations are available atRemaining pictures of Case_4
The analysis report is available at File:4 25 08 4.pdf

# Case 5. Chamber 5

Figure 4.25.08.5: Total Deformation in analysis Case 5 |

The remaining pictures with X, Y, Z Deformations are available atRemaining pictures of Case_5
The analysis report is available at File:4 25 08 5.pdf