June, 7, 2007 Cf rate measurements using Photonics PMT
Jump to navigation
Jump to search
Cf source was placed X cm away from face of PHotonics PMT. The PMT output signal was descriminated by a Lecroy Model # YYY descriminator set to pass any voltage below -0.5 mV. The descriminated output was then sent to a scaler Model ####.
Configuration Definitions
1 :
2:
| Configuration | Rate (counts/min) |
|---|---|
| 1 | 2 |
| 3 | 4 |
| 5 | 6 |