Difference between revisions of "June, 7, 2007 Cf rate measurements using Photonics PMT"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
Cf source was placed X cm away from face of PHotonics PMT. The PMT output signal was descriminated by a Lecroy Model # YYY descriminator set to pass any voltage below -0.5 mV. The descriminated output was then sent to a scaler Model ####. | Cf source was placed X cm away from face of PHotonics PMT. The PMT output signal was descriminated by a Lecroy Model # YYY descriminator set to pass any voltage below -0.5 mV. The descriminated output was then sent to a scaler Model ####. | ||
| − | {| | + | {| border="5" |
! Configuration || Rate (counts/min) | ! Configuration || Rate (counts/min) | ||
|- | |- | ||
Revision as of 21:04, 7 June 2007
Cf source was placed X cm away from face of PHotonics PMT. The PMT output signal was descriminated by a Lecroy Model # YYY descriminator set to pass any voltage below -0.5 mV. The descriminated output was then sent to a scaler Model ####.
| Configuration | Rate (counts/min) |
|---|---|
| 1 | 2 |
| 3 | 4 |
| 5 | 6 |