Difference between revisions of "JLAB PLX LVDS"

From New IAC Wiki
Jump to navigation Jump to search
 
(6 intermediate revisions by the same user not shown)
Line 10: Line 10:
 
[[Image:PLX1.jpg|300px]]
 
[[Image:PLX1.jpg|300px]]
  
[[Image:PLX_3.jpg|300px]][[Image:PLX_4.jpg|300px]]
+
[[Image:PLX_input_and_output_pulses.png|300px]]
 +
 
 +
 
 +
[[Image:PLX_input_and_output_pulses_1.png|300px]]
 +
 
 +
 
 +
=3/17/09=
 +
 
 +
How to use Input register
 +
 
 +
need to write a paragraph here
 +
 
 +
;1.)
 +
-> s3610Status
 +
 +
STATUS for SIS3610 id 0 at base address 0x91003800
 +
------------------------------------------------
 +
Interrupts Enabled  - Mode = 0  (0:RORA 1:ROAK)
 +
VME Interrupt Level: 5  Vector: 0xe0
 +
Sources Enabled: 0x1  Sources Valid: 0x0
 +
 
 +
  MODULE ID  register = 0x36101de0
  
[[Image:PLX_5.jpg|300px]]
+
  STATUS      register = 0x00110000
 +
      User Led  Enabled : 0
 +
      User Output Status : 0x0
 +
      Flip-Flops Enabled : 0x1
 +
      Latch Strobe Status: 0x0
  
[[Image:PLX_input_and_output_pulses.png|300px]]
+
  Direct Output Register = 0x0000
 +
  Direct Input Register  = 0xfbfe
 +
  Latched Input Register = 0xfffe
 +
value = 35 = 0x23 = '#'
 +
 
 +
 
 +
;2.)
 +
-> s3610Status
 +
 
 +
STATUS for SIS3610 id 0 at base address 0x91003800
 +
------------------------------------------------
 +
Interrupts Enabled  - Mode = 0  (0:RORA 1:ROAK)
 +
VME Interrupt Level: 5  Vector: 0xe0
 +
Sources Enabled: 0x1  Sources Valid: 0x0
 +
 
 +
  MODULE ID  register = 0x36101de0
 +
 
 +
  STATUS      register = 0x00110000
 +
      User Led  Enabled : 0
 +
      User Output Status : 0x0
 +
      Flip-Flops Enabled : 0x1
 +
      Latch Strobe Status: 0x0
 +
 
 +
  Direct Output Register = 0x0000
 +
  Direct Input Register  = 0x79fe
 +
  Latched Input Register = 0xfffe
 +
value = 35 = 0x23 = '#'
 +
 
 +
 
 +
 
 +
;3.)
 +
-> s3610Status       
 +
 
 +
STATUS for SIS3610 id 0 at base address 0x91003800
 +
------------------------------------------------
 +
Interrupts Enabled  - Mode = 0  (0:RORA 1:ROAK)
 +
VME Interrupt Level: 5  Vector: 0xe0
 +
Sources Enabled: 0x1  Sources Valid: 0x0
 +
 
 +
  MODULE ID  register = 0x36101de0
  
 +
  STATUS      register = 0x00110000
 +
      User Led  Enabled : 0
 +
      User Output Status : 0x0
 +
      Flip-Flops Enabled : 0x1
 +
      Latch Strobe Status: 0x0
  
[[Image:PLX_input_and_output_pulses_1.png|300px]]
+
  Direct Output Register = 0x0000
 +
  Direct Input Register  = 0x79fe
 +
  Latched Input Register = 0x79fe
 +
value = 35 = 0x23 = '#'
  
 
[http://wiki.iac.isu.edu/index.php/VME_modules Go back]
 
[http://wiki.iac.isu.edu/index.php/VME_modules Go back]
 
[[VME_modules]] Go back
 
[[VME_modules]] Go back

Latest revision as of 01:32, 18 March 2009

A VME Modules designed by Ed Jastrzembski at JLAB

Description:

This PLX board will be built on a Flex I/O format that Ed Jastrzembski developed many years ago. The VME (back end) manages the interface to the bus, and controls two front end 'ports' that can be input or output units.


Media:PLX_BoardLayout.pdf

PLX1.jpg

PLX input and output pulses.png


PLX input and output pulses 1.png


3/17/09

How to use Input register

need to write a paragraph here
1.)
-> s3610Status

STATUS for SIS3610 id 0 at base address 0x91003800 
------------------------------------------------ 
Interrupts Enabled  - Mode = 0  (0:RORA 1:ROAK)
VME Interrupt Level: 5   Vector: 0xe0 
Sources Enabled: 0x1  Sources Valid: 0x0 
 MODULE ID   register = 0x36101de0 
 STATUS      register = 0x00110000 
     User Led   Enabled : 0 
     User Output Status : 0x0 
     Flip-Flops Enabled : 0x1 
     Latch Strobe Status: 0x0 
 Direct Output Register = 0x0000 
 Direct Input Register  = 0xfbfe 
 Latched Input Register = 0xfffe 
value = 35 = 0x23 = '#'


2.)
-> s3610Status
STATUS for SIS3610 id 0 at base address 0x91003800 
------------------------------------------------ 
Interrupts Enabled  - Mode = 0  (0:RORA 1:ROAK)
VME Interrupt Level: 5   Vector: 0xe0 
Sources Enabled: 0x1  Sources Valid: 0x0 
 MODULE ID   register = 0x36101de0 
 STATUS      register = 0x00110000 
     User Led   Enabled : 0 
     User Output Status : 0x0 
     Flip-Flops Enabled : 0x1 
     Latch Strobe Status: 0x0 
 Direct Output Register = 0x0000 
 Direct Input Register  = 0x79fe 
 Latched Input Register = 0xfffe 
value = 35 = 0x23 = '#'


3.)
-> s3610Status        
STATUS for SIS3610 id 0 at base address 0x91003800 
------------------------------------------------ 
Interrupts Enabled  - Mode = 0  (0:RORA 1:ROAK)
VME Interrupt Level: 5   Vector: 0xe0 
Sources Enabled: 0x1  Sources Valid: 0x0 
 MODULE ID   register = 0x36101de0 
 STATUS      register = 0x00110000 
     User Led   Enabled : 0 
     User Output Status : 0x0 
     Flip-Flops Enabled : 0x1 
     Latch Strobe Status: 0x0 
 Direct Output Register = 0x0000 
 Direct Input Register  = 0x79fe 
 Latched Input Register = 0x79fe 
value = 35 = 0x23 = '#'

Go back VME_modules Go back