I2C

From New IAC Wiki
Revision as of 18:26, 7 June 2007 by Oborn (talk | contribs)
Jump to navigation Jump to search

Parameters for the operation of the VFAT board are downloaded to the chip using the I2C protocol.
A good overview of I2C is available on wikipedia

Electrical Characteristics

The I2C specification limits the I2C bus capacitance to 400pF. The cat5e wire specification limits wire capacitance to 50pF/m, so we should be able to push I2C at least 8m. Testing is needed, but by lowering the bus clock and the pull-up resistors a much greater length should be possible.

Task List

  1. Basic I2C working from Gumstix (completed)
  2. VFAT powered on and responding to I2C
  3. I2C controlled from a C program on Gumstix
  4. I2C transmission line testing
  5. Interface Gumstix to controller computer (sockets/web?)

Stuff to buy

  • Power Supply
  • Gumstix (x2)
    • Motherboard
    • Network card
    • Breakout Board
    • Power Plug
    • CF Card
  • I2C expanders
  • I2C eproms (for feedback testing)
  • header pins
  • header pin connectors
  • LED's