Host Computer Configuration

From New IAC Wiki
Revision as of 21:35, 17 August 2007 by Oborn (talk | contribs)
Jump to navigation Jump to search

MVME 6100
ROC1 ethernet address: 0001AF1998B5
ROC1 ethernet address: 0001AF1998B6
MPC7457 RISC G4 processor (PPC family)

Install tftp onto the Linux host computer

For CentOS I used yumm

yum install tftp
yum install tftp-server

then I looked in the file

/etc/xinitd.d/tftp

to see how tftp was configured by default

Debug Connector Pinouts

Information below is Table 5-11 pg 92 of this reference

ROC Pin# DB9 Pin # DB9 shell Signal
1 1 Blue DCD (Carrier Detect)
2 7 Orange RTS (Request to Send)
3 5 Black GNDC
4 3 Red TX (Transmit)
5 2 Green RX (Recieve)
6 5 Yellow GNDC
7 8 Brown CTS (Clear to Send)
8 4 White DTR (Data Terminal Ready)

Basic commands

setting the time

The command below will print the help screen for the time set command

he set

for example

MVME6100> set -t082604163100
MVME6100> time
THU AUG 26 16:31:02.00 2004

show the flash memory

MVME6100> flashShow


Load in the VxWorks boot kernel

MVME6100> tftpGet -cCLIENT_IP_ADDRESS -sSERVER_IP_ADDRESS -fFILENAME

CLIENT_IP_ADDESS is the address to send the file to SERVER_IP_ADDRESS is the address of the computer hosting the file


Flash the RAM with the program

>MVME6100>flashProgram -d/dev/flash0 -o03f00100 -nfff00


After flashing you flip dipswitch #2 on S4 fo off and powercycle