Difference between revisions of "Host Computer Configuration"
Jump to navigation
Jump to search
| Line 25: | Line 25: | ||
| 8 || 4 || DTR (Data Terminal Ready) | | 8 || 4 || DTR (Data Terminal Ready) | ||
|} | |} | ||
| + | |||
| + | == Basic commands== | ||
| + | |||
| + | === setting the time=== | ||
| + | |||
| + | The command below will print the help screen for the time set command | ||
| + | |||
| + | he set | ||
| + | |||
| + | for example | ||
| + | |||
| + | MVME6100> set -t082604163100 | ||
| + | |||
| + | MVME6100> time | ||
| + | |||
| + | THU AUG 26 16:31:02.00 2004 | ||
| + | |||
| + | === show the flash memory=== | ||
| + | |||
| + | MVME6100> flashShow | ||
| + | |||
| + | |||
| + | === Load in the VxWorks boot kernel === | ||
| + | |||
| + | MVME6100> tftpGet -cCLIENT_IP_ADDRESS -sSERVER_IP_ADDRESS -fFILENAME | ||
| + | |||
| + | CLIENT_IP_ADDESS is the address to send the file to | ||
| + | SERVER_IP_ADDRESS is the address of the computer hosting the file | ||
| + | |||
| + | |||
| + | === Flash the RAM with the program=== | ||
| + | |||
| + | >MVME6100>flashProgram -d/dev/flash0 -o03f00100 -nfff00 | ||
| + | |||
| + | |||
| + | After flashing you flip dipwsitch #2 on S4 fo off and powercycle | ||
Revision as of 23:30, 14 August 2007
MVME 6100
ROC1 ethernet address: 0001AF1998B5
ROC1 ethernet address: 0001AF1998B6
MPC7457 RISC G4 processor (PPC family)
Debug Connector Pinouts
Information below is Table 5-11 pg 92 of this reference
| ROC Pin# | DB9 Pin # | Signal |
| 1 | 1 | DCD (Carrier Detect) |
| 2 | 7 | RTS (Request to Send) |
| 3 | 5 | GNDC |
| 4 | 3 | TX (Transmit) |
| 5 | 2 | RX (Recieve) |
| 6 | 5 | GNDC |
| 7 | 8 | CTS (Clear to Send) |
| 8 | 4 | DTR (Data Terminal Ready) |
Basic commands
setting the time
The command below will print the help screen for the time set command
he set
for example
MVME6100> set -t082604163100
MVME6100> time
THU AUG 26 16:31:02.00 2004
show the flash memory
MVME6100> flashShow
Load in the VxWorks boot kernel
MVME6100> tftpGet -cCLIENT_IP_ADDRESS -sSERVER_IP_ADDRESS -fFILENAME
CLIENT_IP_ADDESS is the address to send the file to SERVER_IP_ADDRESS is the address of the computer hosting the file
Flash the RAM with the program
>MVME6100>flashProgram -d/dev/flash0 -o03f00100 -nfff00
After flashing you flip dipwsitch #2 on S4 fo off and powercycle