Difference between revisions of "He3Tube Equipment"
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
| − | The TENNELEC signal output at 1550 Volts has less noise with signal at about 30 mV compared to the output of the ortec | + | The TENNELEC signal output at 1550 Volts has less noise with signal at about 30 mV compared to the output of the ortec. There is a230 mV DC offset on the output |
[[File:He3Signal_NoSource_4-6-2017.png | 300 px]] | [[File:He3Signal_NoSource_4-6-2017.png | 300 px]] | ||
Revision as of 18:42, 6 April 2017
He3 Tube neutron detectors, 1200 Volts with EG&G (ortec) pre amp Model 142PC (Serial #787)
Although 1200 Volts is applied to the Ortec Preamp, only 350 Volts is established on the "input" port where the Tube is plugged in. If 1250 Volts is applied, then 366 Volts is observed.
For the TENNELEC you need to apply 1650 Volts to get 362 applied to the Tube
The TENNELEC signal output at 1550 Volts has less noise with signal at about 30 mV compared to the output of the ortec. There is a230 mV DC offset on the output
