HRRL OTR Test Mar 3rd 2011
Revision as of 22:50, 25 February 2011 by Foretony (talk | contribs) (→Determined if the OTR target is centered on the beam line)
Objectives
Determined if the steering magnets of the gun are connected to power supply
1. Physically check looking at wires. 2. Change currents on the steering magnet, and observe position of the beam spot. If changes then, connected.
Determined if the OTR target is centered on the beam line
Turn of the all the power supplies for the magnets (include gun steering magnets), then observe beam spot at the OTR target. If the beam is centered on the OTR target, then OTR target is centered on the beam line.
Polarization test
Insert a polarizer film. Take several picture for different orientations without changing beam properties.
Determined if the quads are centered on the beam line
Turn off all the power supplies for the quads. Then turn one of the quad, see if the center of the beam is shifting. If it does, then that quad is not centered. Do the same for all other quads.