Difference between revisions of "Gumstix Installation"

From New IAC Wiki
Jump to navigation Jump to search
(Created page with '<p>[http://www.gumstix.net/Software/view/Developer-how-to-s/Reflashing-using-a-serial-connection/111.html serial]. [[File:Gumstix Serial Alignment.jpg|thumb|none|200px|Correct al...')
 
 
(12 intermediate revisions by one other user not shown)
Line 1: Line 1:
<p>[http://www.gumstix.net/Software/view/Developer-how-to-s/Reflashing-using-a-serial-connection/111.html serial].
+
;Establishing Connection with Gumstix
 +
<p>The serial connection with Gumstix can be established through the C-kermit or minicom. You can find instructions on the following web page[http://www.gumstix.net/Software/view/Developer-how-to-s/Reflashing-using-a-serial-connection/111.html serial].
 
[[File:Gumstix Serial Alignment.jpg|thumb|none|200px|Correct alignment of the TTL RS232 adapter]]
 
[[File:Gumstix Serial Alignment.jpg|thumb|none|200px|Correct alignment of the TTL RS232 adapter]]
 
</p>
 
</p>
 +
 +
Make sure that the TTL RS232 adapter is connected correctly and red(shows that gumstix is connected) and yellow(serial cable) lights are '''On'''.
 +
 +
 +
 +
;<math>I^2C</math> Connection
 +
 +
Connecting to the gum adapter(i2c board)
 +
 +
{| border="1"  |cellpadding="20" cellspacing="0
 +
|-
 +
| Cable side || Gumstix side
 +
|-
 +
| Blue || Yellow
 +
|-
 +
| White/Green || Red
 +
|-
 +
| White || Green
 +
|-
 +
| Green || Blue
 +
|}<br>
 +
 +
On Gumstix:
 +
 +
[[File:BreakOutGumstix_5.jpg|200px]]
 +
 +
;Voltage supply
 +
 +
{| border="1"  |cellpadding="20" cellspacing="0
 +
|-
 +
| Gum adapter || Voltage supply
 +
|-
 +
| <math>V_{cc}</math> || <math>out^+</math>
 +
|-
 +
| <math>V_{ground}</math>|| <math>out^-</math>
 +
|}
 +
 +
Gum adapter(<math>V_{cc}</math> && <math>V_{ground}</math>) should be connected to the voltage supply(~2.5 Volts).
 +
 +
;BreakOut Box
 +
 +
From Gum adapter using network cable establish connection with BreakOut box.
 +
 +
[http://wiki.iac.isu.edu/index.php/User_talk:Didbtama Go Back]

Latest revision as of 05:06, 8 December 2012

Establishing Connection with Gumstix

The serial connection with Gumstix can be established through the C-kermit or minicom. You can find instructions on the following web pageserial.

Correct alignment of the TTL RS232 adapter

Make sure that the TTL RS232 adapter is connected correctly and red(shows that gumstix is connected) and yellow(serial cable) lights are On.


[math]I^2C[/math] Connection

Connecting to the gum adapter(i2c board)

Cable side Gumstix side
Blue Yellow
White/Green Red
White Green
Green Blue


On Gumstix:

BreakOutGumstix 5.jpg

Voltage supply
Gum adapter Voltage supply
[math]V_{cc}[/math] [math]out^+[/math]
[math]V_{ground}[/math] [math]out^-[/math]

Gum adapter([math]V_{cc}[/math] && [math]V_{ground}[/math]) should be connected to the voltage supply(~2.5 Volts).

BreakOut Box

From Gum adapter using network cable establish connection with BreakOut box.

Go Back