Difference between revisions of "Gumstix"

Latest revision as of 21:43, 12 November 2012

Hardware

(2)The gumstix motherboard has a 600MHz Marvell XScale processor, 128MB of RAM, and 32MB of flash.
(2)The 80 pin expansion socket is attached to a network interface card for TCP/IP networking.
(2)The 60 pin expansion socket has a breakout-vx card to allow access to the I2C signals, serial ports, and various other GPIO possibilities.
(1)Additionally, 4V power adapters
(3)TTL to serial adapters

Software

Gumstix Documentation Wiki

I2C installation

cgi-bin programs

Boa Webserver is the webserver on the Gumstix.
cgicc is the C++ library used for handling web scripts.

Tutorials

I2C Linux from userspace.
[http://www.yolinux.com/TUTORIALS/LinuxTutorialC++CGI.html libcgicc

Misc

Setting the date

The busybox date -s accepts a very limited format. Use it from another Linux box as follows:

ssh root@134.50.203.56 "echo date -s `date +%m%d%H%M%Y`"

Setting Static IP adress

In the LDS use the static method modifiy the file etc/network/interfaces so it says

auto eth0
iface eth0 inet static
#choose only one address line
#gumstick green ethernet cables #1
        address 134.50.3.93
#gumstick blue ethernet cables #2
        address 134.50.3.175
        netmask 255.255.255.0
        network 134.50.3.0
        broadcast 134.50.3.255
        gateway 134.50.3.254

For JLab Use the static method modifiy the file etc/network/interfaces so it says


# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
 
# The loopback interface
#
auto lo
iface lo inet loopback

#
# Wired interfacesq
#
auto eth0
iface eth0 inet static
address 129.57.36.61
#network 129.57.1.0
gateway 129.57.36.1
netmask 255.255.252.0
broadcast 129.57.39.255

# if netduo attached uncomment lines below
#auto eth1
#iface eth1 inet dhcp

#

In Hall C we had

auto eth0
iface eth0 inet static
        address 129.57.168.91
        netmask 255.255.252.0
        network 129.57.168.0
broadcast 129.57.171.255

Then do commands

ifdown
ifup eth0

Must check the if address of a machine which is connected to the same network by ifconfig and route -n

ifconfig interfaces inet addr >>> address Bcast >>> broadcast

route -n Genmask >>> netmask Gateway >>> gateway

It seems to only use the first DNS entry in /etc/resolv.conf For ISU's network,one of the following addresses needs to be the first nameserver line in the file.

 
search isu.edu
nameserver 134.50.57.57
nameserver 134.50.254.5

@@ Line 1: / Line 1: @@
-The gumstix motherboard used is the [http://www.gumstix.com/store/catalog/product_info.php?products_id=178 verdex XL6P]. It has a 600MHz Marvell XScale processor, 128MB of RAM, and 32MB of flash.
+===Hardware===
+(2)The gumstix [http://www.gumstix.com/store/catalog/product_info.php?products_id=210 motherboard] has a 600MHz Marvell XScale processor, 128MB of RAM, and 32MB of flash.
 <br/>
-The 120 pin expansion socket has a [http://gumstix.com/store/catalog/product_info.php?products_id=183 netCF-vx] network interface card for TCP/IP networking. This card also has a Compact Flash slot should additional storage be required.
+(2)The 80 pin expansion socket is attached to a [http://www.gumstix.com/store/catalog/product_info.php?products_id=207 network interface card] for TCP/IP networking.
 <br/>
-The 60 pin expansion socket has a [http://gumstix.com/store/catalog/product_info.php?products_id=184 breakout-vx] card to allow access to the I2C signals, serial ports, and various other GPIO possibilities.
+(2)The 60 pin expansion socket has a [http://www.gumstix.com/store/catalog/product_info.php?products_id=184 breakout-vx] card to allow access to the I2C signals, serial ports, and various other GPIO possibilities.
+<br/>
+(1)Additionally, [http://www.gumstix.com/store/catalog/product_info.php?products_id=148 4V power adapters]
+<br/>
+(3)[http://www.acroname.com/robotics/parts/S13-SERIAL-INT-CONN.html TTL to serial adapters]
+===Software===
-==Links==
-===Hardware===
-[http://www.gumstix.com Gumstix computers]<br/>
 [http://docwiki.gumstix.org/Main_Page Gumstix Documentation Wiki]<br/>
-===Software===
 ====I2C installation====
@@ Line 19: / Line 20: @@
 [http://www.boa.org Boa Webserver] is the webserver on the Gumstix.<br/>
 [http://www.gnu.org/software/cgicc/ cgicc] is the C++ library used for handling web scripts.<br/>
-[http://buildroot.uclibc.org/ Buildroot] is the system used to build the root image for the gumstix.<br/>
 ===Tutorials===
@@ Line 31: / Line 31: @@
 <pre>
 ssh root@134.50.203.56 "echo date -s `date +%m%d%H%M%Y`"
+</pre>
+===Setting Static IP adress===
+In the LDS use the static method modifiy the file etc/network/interfaces so it says
+<pre>
+auto eth0
+iface eth0 inet static
+#choose only one address line
+#gumstick green ethernet cables #1
+        address 134.50.3.93
+#gumstick blue ethernet cables #2
+        address 134.50.3.175
+        netmask 255.255.255.0
+        network 134.50.3.0
+        broadcast 134.50.3.255
+        gateway 134.50.3.254
+</pre>
+For JLab Use the static method modifiy the file etc/network/interfaces so it says
+<pre>
+# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
+# The loopback interface
+#
+auto lo
+iface lo inet loopback
+#
+# Wired interfacesq
+#
+auto eth0
+iface eth0 inet static
+address 129.57.36.61
+#network 129.57.1.0
+gateway 129.57.36.1
+netmask 255.255.252.0
+broadcast 129.57.39.255
+# if netduo attached uncomment lines below
+#auto eth1
+#iface eth1 inet dhcp
+#
+</pre>
+In Hall C we had
+<pre>
+auto eth0
+iface eth0 inet static
+        address 129.57.168.91
+        netmask 255.255.252.0
+        network 129.57.168.0
+broadcast 129.57.171.255
+</pre>
+Then do commands
+<pre>
+ifdown
+ifup eth0
+</pre>
+Must check the if address of a machine which is connected to the same network by ifconfig and route -n
+ifconfig      interfaces
+inet addr >>> address
+Bcast     >>> broadcast
+route -n
+Genmask   >>> netmask
+Gateway   >>> gateway
+It seems to only use the first DNS entry in /etc/resolv.conf
+For ISU's network,one of the following addresses needs to be the first nameserver line in the file.
+<pre>
+search isu.edu
+nameserver 134.50.57.57
+nameserver 134.50.254.5
 </pre>