Difference between revisions of "Geometry (25 MeV LINAC exit port)"

From New IAC Wiki
Jump to navigation Jump to search
Line 1: Line 1:
 
[http://wiki.iac.isu.edu/index.php/PhotoFission_with_Polarized_Photons_from_HRRL Go Back]
 
[http://wiki.iac.isu.edu/index.php/PhotoFission_with_Polarized_Photons_from_HRRL Go Back]
  
=Minimum accelerator energy to run experiment=
 
 
==condition 1: fitting the collimator size into the hole==
 
 
[[File:min_energy.png|800px]]
 
 
The minimum energy of accelerator (MeV) is limited by fitting the collimator size <math>r_2</math> into the hole R = 8.73 cm:
 
 
<math>x_2 + r_2 = R</math>
 
 
1) Assuming the collimator diameter is <math>\Theta_C</math>:
 
 
<math>\frac{1}{\sqrt{2}}\ (286+183)\ \tan\left(\frac{0.511}{E_{min}}\right) +
 
      \frac{1}{2}\ (286+183)\ \tan\left(\frac{0.511}{E_{min}}\right) = 8.73 \Rightarrow E_{min} = 33.1\ MeV  </math>
 
 
2) Assuming the collimator diameter is <math>\Theta_C/2</math>:
 
 
<math>\frac{1}{\sqrt{2}}\ (286+183)\ \tan\left(\frac{0.511}{E_{min}}\right) +
 
      \frac{1}{2}\ (286+183)\ \tan\left(\frac{1}{2}\ \frac{0.511}{E_{min}}\right) = 8.73 \Rightarrow E_{min} = 26.3\ MeV  </math>
 
 
3) Assuming the collimator diameter is <math>\Theta_C/4</math>:
 
 
<math>\frac{1}{\sqrt{2}}\ (286+183)\ \tan\left(\frac{0.511}{E_{min}}\right) +
 
      \frac{1}{2}\ (286+183)\ \tan\left(\frac{1}{4}\ \frac{0.511}{E_{min}}\right) = 8.73 \Rightarrow E_{min} = 22.8\ MeV  </math>
 
 
4) for arbitrary collimator size <math>\Theta_C/2</math>:
 
 
[[File:plot_energy_collimatorsize.jpeg]]
 
 
All energy above this line is good to run experiment
 
 
==condition 2: F1A = 286 cm==
 
 
1) assuming the collimator diameter is <math>\Theta_C</math>
 
 
<math> E_{min} = 73.7\ MeV  </math>
 
 
2) assuming the collimator diameter is <math>\Theta_C/2</math>
 
 
<math> E_{min} = 36.9\ MeV  </math>
 
 
3) assuming the collimator diameter is <math>\Theta_C/4</math>
 
 
<math> E_{min} = 18.4\ MeV  </math>
 
 
4) for arbitrary collimator size <math>\Theta_C/m</math>:
 
 
[[File:plot_energy_F1A.jpeg]]
 
 
All energy above this line is good to run experiment
 
 
==both conditions above are together==
 
 
[[File:plot_energy_bothcondition.jpeg]]
 
 
All energy above this lines is good to run experiment
 
  
 
=25 MeV geometry=
 
=25 MeV geometry=

Revision as of 19:04, 14 June 2010

Go Back


25 MeV geometry

geometry calculation

collimator diameter [math]\Theta_{critical}[/math] [math]\Theta_{kicker}[/math] [math]\alpha_{collimator}[/math] [math]AC[/math] [math]A_1C_1[/math] [math]BD[/math] [math]B_1D_1[/math] [math]FA[/math] [math]F_1F[/math]
[math]\frac{\Theta_{critical}}{2}[/math] [math]1.17^o[/math] [math]0.83^o[/math] [math]2.03^o[/math] 4.13 cm 6.78 cm 2.92 cm 4.79 cm 75 cm 143 cm
[math]\frac{\Theta_{critical}}{4}[/math] [math]1.17^o[/math] [math]0.83^o[/math] [math]1.43^o[/math] 4.13 cm 6.78 cm 1.46 cm 2.40 cm 136 cm 203 cm

geometry pictures

how it looks 1 ([math] \Theta_c/2[/math], box 3"x4" and then pipe 4")

File:Vacuum pipe collimator .png

how it looks 2 ([math] \Theta_c/4[/math], box 3"x4" and then pipe 4")

File:Vacuum pipe collimator .png


Go Back