DAQ6 CentOS7 install
enp4s0f0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 126.96.36.199 netmask 255.255.255.128 broadcast 188.8.131.52 inet6 fe80::82c1:6eff:fe21:396 prefixlen 64 scopeid 0x20<link> ether 80:c1:6e:21:03:96 txqueuelen 1000 (Ethernet) RX packets 3699 bytes 4760308 (4.5 MiB)
Setup Disk array
The SAS hard drives are not recognized when the computer is first taken out of the box
You need to enter the Configuration Menu from the BIOS by hitting Ctrl-S. You get to this point during the boot process by hitting any key after the computer has done a self diagnostic.