DAQ6 CentOS7 install

From New IAC Wiki
Jump to navigation Jump to search

enp4s0f0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500

       inet 134.50.3.153  netmask 255.255.255.128  broadcast 134.50.3.255
       inet6 fe80::82c1:6eff:fe21:396  prefixlen 64  scopeid 0x20<link>
       ether 80:c1:6e:21:03:96  txqueuelen 1000  (Ethernet)
       RX packets 3699  bytes 4760308 (4.5 MiB)


Setup Disk array

The SAS hard drives are not recognized when the computer is first taken out of the box

You need to enter the Configuration Menu from the BIOS by hitting Ctrl-S. You get to this point during the boot process by hitting any key after the computer has done a self diagnostic.


Host_Computer_Configuration#DAQ6_configuration