Difference between revisions of "CH Phase II Run Plan"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
* Start with different thicknesses of Gd foils using holder 1 | * Start with different thicknesses of Gd foils using holder 1 | ||
| − | ** Minimum thickness is 0.1mm and max is either 5(0.1)+2(0.13) or 5(0.1)+3(0.13), will depend on how many 10x10cm sheets I can cut from the larger piece left. | + | ** Minimum thickness is 0.1mm and max is either 5(0.1)+2(0.13) mm or 5(0.1)+3(0.13) mm, will depend on how many 10x10cm sheets I can cut from the larger piece left. |
='''Previous Pages'''= | ='''Previous Pages'''= | ||
[[CaGaS_Phase_II#V.29_CaGaS_Phase_II|CaGaS Phase II]] | [[CaGaS_Phase_II#V.29_CaGaS_Phase_II|CaGaS Phase II]] | ||
Revision as of 20:55, 20 October 2022
First Experiment
- Might be worth checking the reduction in neutron flux using the He3 tube in the detector arm with the high activity source.
- Since the He3 is most efficient for thermal neutrons, with/out Gd gives an idea of the efficacy of the converter.
- If time, could use the tube for all thicknesses in & out and add to dissertation.
- Start with different thicknesses of Gd foils using holder 1
- Minimum thickness is 0.1mm and max is either 5(0.1)+2(0.13) mm or 5(0.1)+3(0.13) mm, will depend on how many 10x10cm sheets I can cut from the larger piece left.