Difference between revisions of "CHIPS IAC Run 5-30-08"
Jump to navigation
Jump to search
| Line 69: | Line 69: | ||
|- | |- | ||
|73|| NaI073.mpa || IN || In|| Dipole at 2 MeV (1.11 on Pot), 300 Hz rep rate, (802 set to 15.7 kV. 54 <math>\pm</math> 8 counts at 607 keV, Live= seconds, grid = 1.0, Gun = 3 kV. | |73|| NaI073.mpa || IN || In|| Dipole at 2 MeV (1.11 on Pot), 300 Hz rep rate, (802 set to 15.7 kV. 54 <math>\pm</math> 8 counts at 607 keV, Live= seconds, grid = 1.0, Gun = 3 kV. | ||
| + | |- | ||
| + | |74|| NaI074.mpa || IN || Out||''' RF re phasing was done,''' Dipole at 2 MeV (1.11 on Pot), 300 Hz rep rate, (802 set to 15.7 kV. 66<math>\pm</math> 10counts at 6 keV, Live=611 seconds, grid = 1.0, Gun = 3 kV. | ||
|- | |- | ||
|74|| NaI074.mpa || IN || Out|| Dipole at 2 MeV (1.11 on Pot), 300 Hz rep rate, (802 set to 15.7 kV. 66<math>\pm</math> 10counts at 6 keV, Live=611 seconds, grid = 1.0, Gun = 3 kV. | |74|| NaI074.mpa || IN || Out|| Dipole at 2 MeV (1.11 on Pot), 300 Hz rep rate, (802 set to 15.7 kV. 66<math>\pm</math> 10counts at 6 keV, Live=611 seconds, grid = 1.0, Gun = 3 kV. | ||
Revision as of 10:24, 30 May 2008
Beam Tune
| Device | setting |
| RS1 | -0.46 |
| RS2 | +0.77 |
| FS1 | -0.68 |
| FS2 | 0.00 |
| 0Q1 | +0.76 |
| 0Q2 | +0.94 |
| 45Q1 | +0.02 |
| 45Q2 | +1.37 |
| L90Q1 | -2.98 |
| L90Q2 | +0.98 |
| Bend1 | +1.42 |
| Bend2 | +10.66 |
| Gun HV | 20 kV |
| Grid | 4.84 |
| 1202 | 13.2 kV |
| SOL1 | 0.00 |
| SOL2 | 8.59 |
Setting Max rate
| Run # | MPA file name | W | Ta | Description |
| 65 | NaI065.mpa | IN | In | Dipole at 3 MeV (1.11 on Pot), 300 Hz rep rate, (802 set to 15.7 kV. 32 8 counts at 500 keV, Live=750 seconds, grid = 1.64, Gun = 3 kV. |
| 66 | NaI066.mpa | IN | In | Dipole at 3 MeV (1.11 on Pot), 300 Hz rep rate, (802 set to 15.7 kV. 175 counts at 500 keV, Live=610 seconds, grid = 4.0, Gun = 3 kV. |
| 67 | NaI067.mpa | IN | In | Dipole at 3 MeV (1.11 on Pot), 300 Hz rep rate, (802 set to 15.7 kV. 64 9 counts at 500 keV, Live=619 seconds, grid = 1.0, Gun = 3 kV, peak sharpens., at 499 keV peak has 25 counts |
| 68 | NaI068.mpa | IN | In | Dipole at 3 MeV (1.11 on Pot), 300 Hz rep rate, (802 set to 15.7 kV. no peak at 500 keV, Live=600 seconds, grid = 0.5, Gun = 3 kV, peak sharpens. |
| 69 | NaI068.mpa | IN | In | Dipole at 3 MeV (1.11 on Pot), 300 Hz rep rate, (802 set to 15.7 kV. 28 7 count (poor fit) , Live=652 seconds, grid = 1.5, Gun = 3 kV, peak sharpens. |
Energy Scan
Use last dipole to sweep different electron energies.
| 70 | NaI070.mpa | IN | In | Dipole at 3 MeV (1.11 on Pot), 300 Hz rep rate, (802 set to 15.7 kV. 61 9counts at 500 keV, Live=623 seconds, grid = 1.0, Gun = 3 kV. |
| 72 | NaI072.mpa | IN | Out | Dipole at 3 MeV (1.11 on Pot), 300 Hz rep rate, (802 set to 15.7 kV. 519 counts at 629 keV, Live= 629 seconds, grid = 1.0, Gun = 3 kV. |
| 73 | NaI073.mpa | IN | In | Dipole at 2 MeV (1.11 on Pot), 300 Hz rep rate, (802 set to 15.7 kV. 54 8 counts at 607 keV, Live= seconds, grid = 1.0, Gun = 3 kV. |
| 74 | NaI074.mpa | IN | Out | RF re phasing was done, Dipole at 2 MeV (1.11 on Pot), 300 Hz rep rate, (802 set to 15.7 kV. 66 10counts at 6 keV, Live=611 seconds, grid = 1.0, Gun = 3 kV. |
| 74 | NaI074.mpa | IN | Out | Dipole at 2 MeV (1.11 on Pot), 300 Hz rep rate, (802 set to 15.7 kV. 66 10counts at 6 keV, Live=611 seconds, grid = 1.0, Gun = 3 kV. |
Current Scan at Optimal energy
Calibration
Measure HpGe spectrum with Na-22 source and RF on.