Difference between revisions of "CHIPS IAC Run 5-28-08"
Jump to navigation
Jump to search
| Line 49: | Line 49: | ||
{| border="1" |cellpadding="20" cellspacing="0 | {| border="1" |cellpadding="20" cellspacing="0 | ||
|- | |- | ||
| − | |Run # || MPA file name || Description | + | |Run # || MPA file name || W || Ta || Description |
|- | |- | ||
| − | |6|| NaI006.mpa || Background measurement, no source | + | |6|| NaI006.mpa || NA || NA || Background measurement, no source |
|- | |- | ||
| − | |7|| NaI007.mpa || Na-22 source on top of NaI detector | + | |7|| NaI007.mpa || NA || NA || Na-22 source on top of NaI detector |
|- | |- | ||
| − | |8| NaI008.mpa || change spec amp gain from 500 to 200 | + | |8|| NaI008.mpa || NA || NA || change spec amp gain from 500 to 200 |
|- | |- | ||
| − | |9| NaI009.mpa || Co-60 source on top of NaI, Na-22 removed, Spec amp gain back to 500 | + | |9|| NaI009.mpa || NA || NA || Co-60 source on top of NaI, Na-22 removed, Spec amp gain back to 500 |
|- | |- | ||
| − | |10| NaI010.mpa || change spec amp gain from 500 to 1000, put Na-22 and Co-60 on top of Nai | + | |10|| NaI010.mpa || NA || NA || change spec amp gain from 500 to 1000, put Na-22 and Co-60 on top of Nai |
| + | |- | ||
| + | |11|| NaI011.mpa || IN || IN || ADC free running, change spec amp gain to 500, took out sources | ||
| + | ||- | ||
| + | |12|| NaI012.mpa || IN || IN || ADC gated with Gun, change spec amp gain to 500, took out sources | ||
| + | ||- | ||
| + | |13|| NaI013.mpa || IN || IN || | ||
|} | |} | ||
[http://www.iac.isu.edu/mediawiki/index.php/CHIPS_Run_May-2008 Go Back] | [http://www.iac.isu.edu/mediawiki/index.php/CHIPS_Run_May-2008 Go Back] | ||
Revision as of 13:45, 28 May 2008
Delay from gun is about 400 ns gate width between 400 and 800 ns
Tune 4 MeV electrons into Experimental Cell
Optics elements 45Q2, Bend2, L90Q1m L90Q2 are after the tungsten converter.
| Device | setting |
| RS1 | -0.46 |
| RS2 | +0.77 |
| FS1 | -0.68 |
| FS2 | 0.00 |
| 0Q1 | +0.76 |
| 0Q2 | +0.94 |
| 45Q1 | +0.02 |
| 45Q2 | +1.37 |
| L90Q1 | -2.98 |
| L90Q2 | +0.98 |
| Bend1 | +1.42 |
| Bend2 | +10.66 |
| Gun HV | 20 kV |
| Grid | 4.84 |
| 802 | 13.2 kV |
| SOL1 | 0.00 |
| SOL2 | 8.59 |
MPA RUns
| Run # | MPA file name | W | Ta | Description | ||||||||||||
| 6 | NaI006.mpa | NA | NA | Background measurement, no source | ||||||||||||
| 7 | NaI007.mpa | NA | NA | Na-22 source on top of NaI detector | ||||||||||||
| 8 | NaI008.mpa | NA | NA | change spec amp gain from 500 to 200 | ||||||||||||
| 9 | NaI009.mpa | NA | NA | Co-60 source on top of NaI, Na-22 removed, Spec amp gain back to 500 | ||||||||||||
| 10 | NaI010.mpa | NA | NA | change spec amp gain from 500 to 1000, put Na-22 and Co-60 on top of Nai | ||||||||||||
| 11 | NaI011.mpa | IN | IN | ADC free running, change spec amp gain to 500, took out sources | - | 12 | NaI012.mpa | IN | IN | ADC gated with Gun, change spec amp gain to 500, took out sources | - | 13 | NaI013.mpa | IN | IN |