Brem converter optimization

From New IAC Wiki
Revision as of 18:03, 6 December 2014 by Kosiolek (talk | contribs)
Jump to navigation Jump to search

The optimization of the photon yield from Al bremsstrahlung converter was simulated using Geant4 for the incident electrons with the energy E = 10.5 MeV and U-238 target.


The total [math](\gamma,f)[/math] cross section for U-238 target was taken fron nndc/BNL web site and provided below:

U238 cross section.jpg

Since the electron energy is 10.5 MeV the photons will have maximum energy of 10.5 MeV. The information on the photofission cross section was obtained for the photon energies in the range of [5-10.5] MeV using polynomial fit and presented below for the magnified region of the U-238 cross section vs photon energy plot:

U238 cross section magnified.png

The photon yield as a function of the photon energy simulated for different bremsstrahlung converter lengths is provided below. In each case of the converter length the number of the incident electrons was equal to [math]10^6[/math]. No collimation cuts were applied.

Total gamma yield Al dx.png

After the normalization of the total yield to the number of incident electrons and photon energy, and weighting the yield by the U-238 [math](\gamma,f)[/math] cross section, the following photon yield was obtained (no collimation cuts were applied) :

Weighted gamma yield Al dx.png

As can be seen for the given U-238 target the highest reaction [math](\gamma,f)[/math] rate would be for the case of 3 mm Al radiator.