Beam Test Apr 26 2012

From New IAC Wiki
Jump to navigation Jump to search

Coil current vs Electron Beam Energy

Coil           En                Mod HVPS Grid Set
Current 
(Amp)          (MeV)
6.50 	 	3.49960871
15.25 	 	8.04790047        
15.3                             4.12  (En Switch off)
24 	 	12.5378648        4.30  (En Switch off)
33 	 	15.6004336        4.84  (En Switch off)

Preparation

[Check List]

1. Magnets (on/off)

2. Camera: (on/off) (Sync) (shielding)

3. Flags: (In/Out)

4. Farady Cup: hocked up?

5. Blank off for camera on?

6. Gas bottle for valve full?

7. Gas bottle for flags full?

15.6 MeV Setting

Quad Scan is done here with Q1.


Energy switch changed to low energy setting. Part of the cavity is grounded.

Energy Switch Out (High En Range)
Dipole Coil Current 33
e- Beam Energy () 15.6004336 MeV (mapping )
Solenoid 1 A
Solenoid 2 A
Gun Hor 0 A
Gun Ver 0 A
Output Hor 0.4 A
Output Ver 0.3 A
Rep Rate 6
Gun HV 8.99(Knob Setting)
Gun Grid Voltage 10 (Knob Setting)
RF frequency 2856.291 MHz
Modulator HV Power Supply 4.84 (Knob Setting)
RF macro Pulse Length (FWHM) 300 ns
Q1 (A) 0
Q2 (A) 0
Q3 (A) 0
Q4 (A) 0
Q5 (A) 0
Q6 (A) 0
Peak Current on FC 1 (45 deg) 88.8 mAmps
Peak Current on FC 2 (45 deg) 26.4 mAmps
Scope on FC 1 200 px
Scope on FC 2 200 px
Beam Spot 200 px


Gun has been up to air for 3 times. It could be oxidation, contamination. Or it could be gun died, less likely. Roasting the gun to burn off the contamination is an idea. Chad just roasted gun for with higher current, we saw gun current increased many times. We will leave roasted for one night.

En spread and En measurement

File name in Flash drive.

File Name in Flash Drive Dipole Coil Current (Amps)
Tek00008.png 24
Tek00009.png 25
Tek00010.png 26
Tek00011.png 27
Tek00012.png 27.5
300 px 28
300 px 28.5
300 px 29
300 px 29.5
Tek00017.png 30
Tek00018.png 30.5
Tek00019.png 31
Tek00020.png 31.5
Tek00021.png 32
Tek00022.png 32.5
Tek00023.png 32.8
Tek00024.png 33
Tek00025.png 33.2
Tek00026.png 33.5
Tek00027.png 34
Tek00028.png 35
300 px 36
300 px 38
300 px 40
300 px 42
Power supply limit is 42 Amp



File Name in Flash Drive Dipole Coil Current (Amps)
300 px 24
300 px 25
300 px 26
300 px 27
300 px 27.5
300 px 28
300 px 28.5
300 px 29
300 px 29.5
300 px 30
300 px 30.5
300 px 31
300 px 31.5
300 px 32
300 px 32.5
300 px 32.8
300 px 33
300 px 33.2
300 px 33.5
300 px 34
300 px 35
300 px 36
300 px 38
300 px 40
300 px 42
Power supply limit is 42 Amp

Assumed 10 MeV Setting

Energy set to close to 10 Region.


Energy switch changed to low energy setting. Part of the cavity is grounded.

Energy Switch Out (High En Range)
Dipole Coil Current
e- Beam Energy () MeV (estimate)
Solenoid 1 5.7 A
Solenoid 2 1.8 A
Gun Hor 0 A
Gun Ver 0 A
Output Hor -0.4 A
Output Ver 0.3 A
Rep Rate 30
Gun HV 10.0(Knob Setting)
Gun Grid Voltage 10.0 (Knob Setting)
RF frequency 2856.290 MHz
Modulator HV Power Supply 4.21 (Knob Setting)
RF macro Pulse Length (FWHM) 500 ns
Q1 (A) 0
Q2 (A) 0
Q3 (A) 0
Q4 (A) 0
Q5 (A) 0
Q6 (A) 0
Peak Current on FC 1 (45 deg) 42.8 mAmps
Peak Current on FC 2 (45 deg) 15.76 mAmps
Scope on FC 1 200 px
Scope on FC 2 200 px file name in flash drive is 10MeV_20A.png
Beam Spot 200 px


File Name in Flash Drive Dipole Coil Current (Amps)
tek00032.png 8
tek00033.png 9
tek00034.png 10
tek00035.png 11
tek00036.png 12
tek00037.png 13
tek00038.png 14
tek00039.png 15
tek00040.png 16
tek00041.png 17
tek00042.png 18
tek00043.png 19
tek00044.png 20
tek00045.png 21
tek00046.png 22
tek00047.png 23
tek00048.png 24
tek00049.png 25
tek00050.png 17.5
tek00051.png 18.5
tek00052.png 19.5
tek00053.png 20.5
tek00054.png 21.5
tek00056.png 22.5
tek00057.png 23.5

MeV Setting Energy with Switch on, Highest Mod HVPS (5.0 nob)

Energy switch turned on.

Dipole Set to MeV.


Energy switch changed to low energy setting. Part of the cavity is grounded.

Energy Switch Out (High En Range)
Energy with Switch on
Dipole Coil Current 20
e- Beam Energy () 10 MeV (estimate)
Solenoid 1 13.7 A
Solenoid 2 9.1 A
Gun Hor 0.5 A
Gun Ver 0 A
Output Hor 0.4 A
Output Ver 0.3 A
Rep Rate 30
Gun HV 10.0(Knob Setting)
Gun Grid Voltage 10.0 (Knob Setting)
RF frequency 2856.450 MHz
Modulator HV Power Supply 5.0 (Knob Setting)
RF macro Pulse Length (FWHM) 500 ns
Q1 (A) 0
Q2 (A) 0
Q3 (A) 0
Q4 (A) 0
Q5 (A) 0
Q6 (A) 0
Peak Current on FC 1 (45 deg) 42.8 mAmps
Peak Current on FC 2 (45 deg) 36.8 mAmps
Scope on FC 1 200 px
Scope on FC 2 200 px
Beam Spot 200 px


File Name in Flash Drive Dipole Coil Current (Amps)
tek00057.png 12
tek00058.png 13
tek00059.png 14
tek00060.png 15
tek00061.png 13.5
tek00062.png 14.5
tek00063.png 15.5
tek00066.png 16
tek00067.png 16.5
tek00068.png 17
tek00069.png 18
tek00070.png 19
tek00071.png 20
tek00072.png 21
tek00073.png 22
tek00074.png 23
tek00075.png 24
tek00076.png 25
tek00077.png 26
tek00078.png 27
tek00079.png 28
tek00080.png 29
tek00081.png 30
tek00082.png 31
tek00083.png 32


8.05 MeV

Energy switch turned on.

Dipole Set to MeV.


Energy switch changed to low energy setting. Part of the cavity is grounded.

Energy Switch In
Energy with Switch on
Dipole Coil Current 15.3
e- Beam Energy () 10 MeV (estimate)
Solenoid 1 13.7 A
Solenoid 2 9.1 A
Gun Hor 0.5 A
Gun Ver 0 A
Output Hor 0.4 A
Output Ver 0.3 A
Rep Rate 30
Gun HV 10.0(Knob Setting)
Gun Grid Voltage 10.0 (Knob Setting)
RF frequency 2856.450 MHz
Modulator HV Power Supply 4.26 (Knob Setting)
RF macro Pulse Length (FWHM) 500 ns
Q1 (A) 0
Q2 (A) 0
Q3 (A) 0
Q4 (A) 0
Q5 (A) 0
Q6 (A) 0
Peak Current on FC 1 (45 deg) 42.8 mAmps
Peak Current on FC 2 (45 deg) 36.8 mAmps
Scope on FC 1 200 px
Scope on FC 2 200 px
Beam Spot 200 px


File Name in Flash Drive Dipole Coil Current (Amps)
tek00084.png 15.3
tek00085.png 13
tek00086.png 14
tek00087.png 14.5
tek00088.png 15
tek00089.png 15.5
tek00090.png 16
tek00091.png 16.5
tek00092.png 17
tek00093.png 17.5
tek00094.png 18
tek00095.png 18.5
tek00096.png 19
tek00097.png 19.5
tek00098.png 20
tek00099.png 21
tek00100.png 22
tek00101.png 0 (image at FC1)

Calibration

736x527pxHrrl Apr26 2012 Cal 1.png

736x527pxHrrl Apr26 2012 Cal 2.png

734x529pxHrrl Apr26 2012 Cal 3.png

736x530pxHrrl Apr26 2012 Cal 4.png

733x530pxHrrl Apr26 2012 Cal 5.png

734x525pxHrrl Apr26 2012 Cal 6.png

736x529pxHrrl Apr26 2012 Cal 7.png

733x528pxHrrl Apr26 2012 Cal 8.png

Camera Triggering

Triggering

We sent the pulse from gun trigger to a pulser. We delayed the pulse 8 micro-second, created 8 micro-second wide pulse with 4 V amplitude. This pulse triggered the camera. In following figure camera trigger pulse and signal 45 degree Faraday cup is shown.

Hrrl Apr26 2012 Cam Trig.png


Camera Configuration

Camera operated stably in pulsed mode. Run script saved and given

File:Hrrl Apr26 2012 Cam Run Script.txt


<?xml version="1.0" encoding="utf-8"?>
<Script xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
 <CommandList>
   <Command>
     <FeatureName>DeviceUserID</FeatureName>
     <FeatureValue />
   </Command>
   <Command>
     <FeatureName>ShutterMode</FeatureName>
     <FeatureValue>PresetShutter</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PresetShutter</FeatureName>
     <FeatureValue>1/100 sec</FeatureValue>
   </Command>
   <Command>
     <FeatureName>ShutterMode</FeatureName>
     <FeatureValue>ProgrammableExposure</FeatureValue>
   </Command>
   <Command>
     <FeatureName>ExposureTimeRaw</FeatureName>
     <FeatureValue>628</FeatureValue>
   </Command>
   <Command>
     <FeatureName>ShutterMode</FeatureName>
     <FeatureValue>AutoExposureMode</FeatureValue>
   </Command>
   <Command>
     <FeatureName>ShutterMode</FeatureName>
     <FeatureValue>ExposureTimeAbs</FeatureValue>
   </Command>
   <Command>
     <FeatureName>ExposureTimeAbs</FeatureName>
     <FeatureValue>16666</FeatureValue>
   </Command>
   <Command>
     <FeatureName>ShutterMode</FeatureName>
     <FeatureValue>Auto Exposure</FeatureValue>
   </Command>
   <Command>
     <FeatureName>ExposureMode</FeatureName>
     <FeatureValue>Pulse-width control</FeatureValue>
   </Command>
   <Command>
     <FeatureName>Smearless</FeatureName>
     <FeatureValue>Smearless Off</FeatureValue>
   </Command>
   <Command>
     <FeatureName>Accumulation</FeatureName>
     <FeatureValue>Synchronous</FeatureValue>
   </Command>
   <Command>
     <FeatureName>GainAuto</FeatureName>
     <FeatureValue>AGC Off</FeatureValue>
   </Command>
   <Command>
     <FeatureName>GainRaw</FeatureName>
     <FeatureValue>91</FeatureValue>
   </Command>
   <Command>
     <FeatureName>BlackLevelRaw</FeatureName>
     <FeatureValue>9</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineSelector</FeatureName>
     <FeatureValue>CameraTrigger</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineSource</FeatureName>
     <FeatureValue>Hirose TTL In 1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineInverter</FeatureName>
     <FeatureValue>Active High</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineSelector</FeatureName>
     <FeatureValue>HiroseTTLOut1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineSource</FeatureName>
     <FeatureValue>EEN</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineInverter</FeatureName>
     <FeatureValue>Active High</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineSelector</FeatureName>
     <FeatureValue>HiroseTTLOut2</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineSource</FeatureName>
     <FeatureValue>FVAL</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineInverter</FeatureName>
     <FeatureValue>Active High</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineSelector</FeatureName>
     <FeatureValue>PulseGenerator0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineSource</FeatureName>
     <FeatureValue>Off</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineInverter</FeatureName>
     <FeatureValue>Active High</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineSelector</FeatureName>
     <FeatureValue>PulseGenerator1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineSource</FeatureName>
     <FeatureValue>Off</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineInverter</FeatureName>
     <FeatureValue>Active High</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineSelector</FeatureName>
     <FeatureValue>PulseGenerator2</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineSource</FeatureName>
     <FeatureValue>Off</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineInverter</FeatureName>
     <FeatureValue>Active High</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineSelector</FeatureName>
     <FeatureValue>PulseGenerator3</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineSource</FeatureName>
     <FeatureValue>Off</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineInverter</FeatureName>
     <FeatureValue>Active High</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineSelector</FeatureName>
     <FeatureValue>Camera Trigger</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineSource</FeatureName>
     <FeatureValue>Hirose TTL In 1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>LineInverter</FeatureName>
     <FeatureValue>Active High</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceRepetitions</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceEndingPosition</FeatureName>
     <FeatureValue>10</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceSelector</FeatureName>
     <FeatureValue>Sequence1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceExposureTimeRaw</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceMasterGain</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceSelector</FeatureName>
     <FeatureValue>Sequence2</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceExposureTimeRaw</FeatureName>
     <FeatureValue>628</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceMasterGain</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceSelector</FeatureName>
     <FeatureValue>Sequence3</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceExposureTimeRaw</FeatureName>
     <FeatureValue>628</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceMasterGain</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceSelector</FeatureName>
     <FeatureValue>Sequence4</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceExposureTimeRaw</FeatureName>
     <FeatureValue>628</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceMasterGain</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceSelector</FeatureName>
     <FeatureValue>Sequence5</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceExposureTimeRaw</FeatureName>
     <FeatureValue>628</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceMasterGain</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceSelector</FeatureName>
     <FeatureValue>Sequence6</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceExposureTimeRaw</FeatureName>
     <FeatureValue>628</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceMasterGain</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceSelector</FeatureName>
     <FeatureValue>Sequence7</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceExposureTimeRaw</FeatureName>
     <FeatureValue>628</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceMasterGain</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceSelector</FeatureName>
     <FeatureValue>Sequence8</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceExposureTimeRaw</FeatureName>
     <FeatureValue>628</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceMasterGain</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceSelector</FeatureName>
     <FeatureValue>Sequence9</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceExposureTimeRaw</FeatureName>
     <FeatureValue>628</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceMasterGain</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceSelector</FeatureName>
     <FeatureValue>Sequence10</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceExposureTimeRaw</FeatureName>
     <FeatureValue>628</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceMasterGain</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceSelector</FeatureName>
     <FeatureValue>Sequence 1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceExposureTimeRaw</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>SequenceMasterGain</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>ClockSource</FeatureName>
     <FeatureValue>Pixel Clock</FeatureValue>
   </Command>
   <Command>
     <FeatureName>ClockPreScaler</FeatureName>
     <FeatureValue>4095</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorSelector</FeatureName>
     <FeatureValue>PulseGenerator0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorLength</FeatureName>
     <FeatureValue>1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorStartPoint</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorRepeatCount</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorEndPoint</FeatureName>
     <FeatureValue>1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorClear</FeatureName>
     <FeatureValue>Free Run</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorSelector</FeatureName>
     <FeatureValue>PulseGenerator1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorLength</FeatureName>
     <FeatureValue>1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorStartPoint</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorRepeatCount</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorEndPoint</FeatureName>
     <FeatureValue>1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorClear</FeatureName>
     <FeatureValue>Free Run</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorSelector</FeatureName>
     <FeatureValue>PulseGenerator2</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorLength</FeatureName>
     <FeatureValue>1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorStartPoint</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorRepeatCount</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorEndPoint</FeatureName>
     <FeatureValue>1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorClear</FeatureName>
     <FeatureValue>Free Run</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorSelector</FeatureName>
     <FeatureValue>PulseGenerator3</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorLength</FeatureName>
     <FeatureValue>1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorStartPoint</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorRepeatCount</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorEndPoint</FeatureName>
     <FeatureValue>1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorClear</FeatureName>
     <FeatureValue>Free Run</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorSelector</FeatureName>
     <FeatureValue>Pulse Generator 0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorLength</FeatureName>
     <FeatureValue>1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorStartPoint</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorEndPoint</FeatureName>
     <FeatureValue>1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorRepeatCount</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>PulseGeneratorClear</FeatureName>
     <FeatureValue>Free Run</FeatureValue>
   </Command>
   <Command>
     <FeatureName>GevCurrentIPConfigurationLLA</FeatureName>
     <FeatureValue>True</FeatureValue>
   </Command>
   <Command>
     <FeatureName>GevCurrentIPConfigurationDHCP</FeatureName>
     <FeatureValue>True</FeatureValue>
   </Command>
   <Command>
     <FeatureName>GevCurrentIPConfigurationPersistentIP</FeatureName>
     <FeatureValue>False</FeatureValue>
   </Command>
   <Command>
     <FeatureName>GevPersistentIPAddress</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>GevPersistentSubnetMask</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>GevPersistentDefaultGateway</FeatureName>
     <FeatureValue>0</FeatureValue>
   </Command>
   <Command>
     <FeatureName>GevHeartbeatTimeout</FeatureName>
     <FeatureValue>15000</FeatureValue>
   </Command>
   <Command>
     <FeatureName>GevEventTrigger</FeatureName>
     <FeatureValue>False</FeatureValue>
   </Command>
   <Command>
     <FeatureName>GevEventStartOfExposure</FeatureName>
     <FeatureValue>False</FeatureValue>
   </Command>
   <Command>
     <FeatureName>GevEventEndOfExposure</FeatureName>
     <FeatureValue>False</FeatureValue>
   </Command>
   <Command>
     <FeatureName>GevEventStartOfTransfer</FeatureName>
     <FeatureValue>False</FeatureValue>
   </Command>
   <Command>
     <FeatureName>GevEventEndOfTransfer</FeatureName>
     <FeatureValue>False</FeatureValue>
   </Command>
   <Command>
     <FeatureName>UserSetSelector</FeatureName>
     <FeatureValue>Default</FeatureValue>
   </Command>
   <Command>
     <FeatureName>UserSetSelector</FeatureName>
     <FeatureValue>UserSet1</FeatureValue>
   </Command>
   <Command>
     <FeatureName>UserSetSelector</FeatureName>
     <FeatureValue>UserSet2</FeatureValue>
   </Command>
   <Command>
     <FeatureName>UserSetSelector</FeatureName>
     <FeatureValue>UserSet3</FeatureValue>
   </Command>
   <Command>
     <FeatureName>UserSetSelector</FeatureName>
     <FeatureValue>Factory</FeatureValue>
   </Command>
 </CommandList>
</Script>