Difference between revisions of "Alpha Ionization"

From New IAC Wiki
Jump to navigation Jump to search
Line 29: Line 29:
 
where  <math > \lambda </math> represents random landau number. By dividing the energy loss by the minimum energy for producing a pair of ion/electron W, it gives the number of electrons emitted by ionization.
 
where  <math > \lambda </math> represents random landau number. By dividing the energy loss by the minimum energy for producing a pair of ion/electron W, it gives the number of electrons emitted by ionization.
  
Srim can simulate the motion of an alpha particle in Ar/CO2 gas by  considering  the change in the stopping power per unit length, it also can show the ionization energy loss as shown in the following figure:
+
Srim can simulate the motion of an alpha particle in Ar/CO2 gas by  considering  the change in the stopping power per unit length, it can also show the ionization energy loss as shown in the following figure:
  
 
[[File:4.8MeV_ionization_ArCo2.jpeg]]
 
[[File:4.8MeV_ionization_ArCo2.jpeg]]
  
 
The figure shows the ionization energy loss of 999 alpha particles as they pass through a 0.85 mm Ar/CO2 gas. integrating the area under the curve, then dividing by (W*1000) will give the number of delta electrons produced by an alpha particle.
 
The figure shows the ionization energy loss of 999 alpha particles as they pass through a 0.85 mm Ar/CO2 gas. integrating the area under the curve, then dividing by (W*1000) will give the number of delta electrons produced by an alpha particle.

Revision as of 19:45, 1 February 2014

Alpha Particles ionization simulation using GEANT4

GEANT4 simulates the ionization of alpha particles in Ar/CO2 90/10 gas. Geant4 can simulate the ionization process for the alpha particles, but unfortunately the value of the step function of the step function that determines the number of delta electrons is very low even by decreasing the cut to 1 nm. Also Range of alpha particles in Ar/CO2 gas is not accurate and does not match the projected ranges using srim File:Alpha range ArCo2.txt, the following table shows the maximum range of the alpha particles that are emitted from the U-233, and the ranges calculated by srim.

Alpha Energy (MeV) G4 Range (cm) Srim Range (um)
1.0 0.56599 129.49
2.0 1.1467 255.91
3.0 1.9024 417.27
4.0 2.8012 612.45
5.0 3.8425 839.91

Based on the previous table, GEANt4 failed to calculate the expected alpha range for most energy, in addition to underestimating the number of alpha's delta electrons emitted through that range.

Calculating the number of the delta electrons without using GEANT4

there is Another way to Calculate the number of delta electrons without using GEANT4. It starts by calculating the average energy loss [math] \Delta E_a[/math] by the alpha and average energy loss per unit length [math] {\zeta} [/math] in Ar/CO2 gas using Bethe-Block equation,then using the the following equation:

[math] \lambda = \frac{ \Delta E - \Delta E_a}{\zeta} [/math]

to calculate the actual energy loss by ionization [math] \Delta E [/math], where [math] \lambda [/math] represents random landau number. By dividing the energy loss by the minimum energy for producing a pair of ion/electron W, it gives the number of electrons emitted by ionization.

Srim can simulate the motion of an alpha particle in Ar/CO2 gas by considering the change in the stopping power per unit length, it can also show the ionization energy loss as shown in the following figure:

4.8MeV ionization ArCo2.jpeg

The figure shows the ionization energy loss of 999 alpha particles as they pass through a 0.85 mm Ar/CO2 gas. integrating the area under the curve, then dividing by (W*1000) will give the number of delta electrons produced by an alpha particle.