Difference between revisions of "8-15-2017"

From New IAC Wiki
Jump to navigation Jump to search
 
(11 intermediate revisions by the same user not shown)
Line 11: Line 11:
 
|-
 
|-
 
| 6608 ||Integral=  260 +-5 pV*s  peak = 1.1A || '''DU '''  ||  10.5 MeV (1110 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz.  ||[[File:R6608.png|230px]]  ||  || ||Run stopped b/c Chad says for less than a minute there was the 60 nsec later beam pulse.
 
| 6608 ||Integral=  260 +-5 pV*s  peak = 1.1A || '''DU '''  ||  10.5 MeV (1110 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz.  ||[[File:R6608.png|230px]]  ||  || ||Run stopped b/c Chad says for less than a minute there was the 60 nsec later beam pulse.
 +
|-
 +
| 6609 ||Integral=  275 +-5 pV*s  peak = 1.1A || '''DU '''  ||  10.5 MeV (1110 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz.  ||[[File:R6609.png|230px]]  ||  || ||
 +
|-
 +
| 6610 ||Integral=  285 +-5 pV*s  peak = 1.1A || '''DU '''  ||  10.5 MeV (1110 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz.  ||[[File:R6610.png|230px]]  ||  || ||
 +
|-
 +
| 6611 ||Integral=  297+-5 pV*s  || '''DU '''  ||  10.5 MeV (1110 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz.  ||[[File:R6611.png|230px]]  ||  || ||
 +
|-
 +
| 6612 ||Integral=  268+-5 pV*s  || '''DU '''  ||  10.5 MeV (1110 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz.  ||[[File:R6612.png|230px]]  ||  || Stopped at 15:35 for beam operator to make an entry to increase gas pressure; Nominal is 16 psi and was down to 12; Known to trip at 11.5 psi||
 +
|-
 +
| 6613 ||Integral=  280+-5 pV*s  || '''DU '''  ||  10.5 MeV (1110 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz.  ||[[File:R6613.png|230px]]  ||  || Stopped at 16:06 due to CO2 pressure now being too high (20 psi); Adjusting back to 16 psi||
 +
|-
 +
| 6614 ||Integral=  280+-10 pV*s  || '''DU '''  ||  10.5 MeV (1109 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz.  ||[[File:R6614.png|230px]]  ||  || ||
 +
|-
 +
| 6615 ||Integral=  285+-5 pV*s  || '''DU '''  ||  10.5 MeV (1109 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz.  ||[[File:R6615.png|230px]]  ||  || ||
 
|}
 
|}
  

Latest revision as of 00:13, 16 August 2017

2nCor_44#Aug_2017

Aug_2017_ChkList#Checklist

Run # Charge/pulse Target Configuration Individual histos + rates Neutron Monitor no top bottom coin. other
6606 Integral= 285 +-5 pV*s peak = 1.1A D2O 10.5 MeV (1110 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz. R6606.png Run ended b/c current is wandering.
6607 Integral= 260 +-10 pV*s peak = 1.1A D2O 10.5 MeV (1110 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz. R6607.png
6608 Integral= 260 +-5 pV*s peak = 1.1A DU 10.5 MeV (1110 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz. R6608.png Run stopped b/c Chad says for less than a minute there was the 60 nsec later beam pulse.
6609 Integral= 275 +-5 pV*s peak = 1.1A DU 10.5 MeV (1110 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz. R6609.png
6610 Integral= 285 +-5 pV*s peak = 1.1A DU 10.5 MeV (1110 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz. R6610.png
6611 Integral= 297+-5 pV*s DU 10.5 MeV (1110 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz. R6611.png
6612 Integral= 268+-5 pV*s DU 10.5 MeV (1110 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz. R6612.png Stopped at 15:35 for beam operator to make an entry to increase gas pressure; Nominal is 16 psi and was down to 12; Known to trip at 11.5 psi
6613 Integral= 280+-5 pV*s DU 10.5 MeV (1110 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz. R6613.png Stopped at 16:06 due to CO2 pressure now being too high (20 psi); Adjusting back to 16 psi
6614 Integral= 280+-10 pV*s DU 10.5 MeV (1109 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz. R6614.png
6615 Integral= 285+-5 pV*s DU 10.5 MeV (1109 Gauss) , 3 ns FWHM pulse width , 1.1 A Peak , 240 Hz. R6615.png

Aug_2017_ChkList#Checklist

2nCor_44#Aug_2017