Difference between revisions of "2n Position resolution"

From New IAC Wiki
Jump to navigation Jump to search
Line 3: Line 3:
 
[[File:sig_resp2.png | 600 px]]
 
[[File:sig_resp2.png | 600 px]]
  
FFT of the signal function and response function is presented below:
+
Raw data of FFT deconvolution of signal function and response function is presented below:
  
[[File:FFT_sig_resp2.png | 600 px]]
+
[[File:FFT_sig_resp_deconv.png | 600 px]]
 +
 
 +
It can be seen the high frequency noise component in the raw data. Applying low pass filtering we could get the deconvoluted data:
 +
 
 +
[[File:FFT_sig_resp_deconv_filter.png | 600 px]]
  
 
Hence, any coordinate of the neutron hit has the following uncertainty in: sigma = 5.15 ns and its value converted into cm is 5.15 ns x 7.41 cm/ns = 38.2 cm. The total length of the active area of the neutron detector is 75 cm.
 
Hence, any coordinate of the neutron hit has the following uncertainty in: sigma = 5.15 ns and its value converted into cm is 5.15 ns x 7.41 cm/ns = 38.2 cm. The total length of the active area of the neutron detector is 75 cm.

Revision as of 16:37, 5 April 2013

Experimental distribution of TDC difference time spectrum (blue) and ideal response function (red) are shown below:

Sig resp2.png

Raw data of FFT deconvolution of signal function and response function is presented below:

FFT sig resp deconv.png

It can be seen the high frequency noise component in the raw data. Applying low pass filtering we could get the deconvoluted data:

FFT sig resp deconv filter.png

Hence, any coordinate of the neutron hit has the following uncertainty in: sigma = 5.15 ns and its value converted into cm is 5.15 ns x 7.41 cm/ns = 38.2 cm. The total length of the active area of the neutron detector is 75 cm.