2nCor Equipment
Detectors
PMTs
http://www.hamamatsu.com/resources/pdf/etd/R580_TPMH1100E.pdf
Scintillators
e+e- spectrometer
DAQ electronics
Signal Processing
Discriminator
CAEN N841
The pulse forming stage of the discriminator produces an output pulse whose width is adjustable in a range from 5 ns to 40 ns. Each channel can work both in Updating and Non-Updating mode according to on-board jumpers position. The discriminator thresholds are individually settable in a range from -1 mV to -255 mV (1 mV step), via an 8-bit DAC. The minimum detectable signal is -5 mV. The back panel houses VETO and TEST inputs, the OR output and the Current Sum output, which generates a current proportional to the input multiplicity, i. e. to the number of channels over threshold, at a rate of -1.0 mA per hit (-50 mV per hit into a 50 Ohm load) ±20%.
NIM-ECL converter
Phillips Model 726
TDC
Detector name convention
- BLUT = Beam Left Upstream Top pmt
- TDC channel Map
| Detector | Angle | TDC channel | NIM-ECL channel | Patch Pannel # |
| BLUT | 135 | TDC 16 | in B ch 0 | 223A6 |
| BLUB | 135 | TDC 17 | in B ch 1 | 223A7 |
| BRT | 270 | TDC 24 | in A ch 0 | 223A14 |
| BRB | 270 | TDC 25 | in A ch 1 | 223A15 |
| BLDT | 45 | TDC 26 | in A ch 2 | 223A16 |
| BLDB | 45 | TDC 27 | in A ch 3 | 223A17 |