Difference between revisions of "2NCorr SPDP Introduction"

From New IAC Wiki
Jump to navigation Jump to search
Line 1: Line 1:
 
[[Production Analysis | go_back ]]
 
[[Production Analysis | go_back ]]
  
The neutron efficiency and acceptance of the array of detectors vars highly non-uniformly with respect to neutron-neutron opening angle (<math>\theta_{nn}</math>). This is due to the array's non-spherically symmetric geometry, and its neutron detection efficiency as a function of both particle position and energy (see figure).  
+
The neutron efficiency and acceptance of our detector array varies highly non-uniformly over the range of neutron-neutron opening angles (<math>\theta_{nn}</math>). This is due to the detector array's non-spherically symmetric geometry, and to its varying neutron detection efficiency as a function of both position and energy (see figure).  
  
 
<div><ul>  
 
<div><ul>  

Revision as of 22:39, 19 January 2018

go_back

The neutron efficiency and acceptance of our detector array varies highly non-uniformly over the range of neutron-neutron opening angles ([math]\theta_{nn}[/math]). This is due to the detector array's non-spherically symmetric geometry, and to its varying neutron detection efficiency as a function of both position and energy (see figure).

  • Measured opening angle distribution of neutrons from the spontaneous fission of Cf252.
  • For this reason, every measured distribution is made meaningful by normalizing against a "control" distribution. This is done by diving the values of the measured distribution by the control distribution on a bin-by-bin basis. For [math]\theta_{nn}[/math], the control distribution is made by looking at pairs of two separate pulses, and if there is a neutron event in both pulses, the opening angle between the two events is calculated. Since no information can be shared between the neutrons of different pulses, the control distribution is completely free of correlations, but is nonetheless subject to the usual effects of detector geometry and efficiency as a function of position and energy. So what is meant by "angular correlation" here, is the measured rate relative to a totally uncorrelated neutron source.





    go_back