Difference between revisions of "201202 R1ProgressRep"

From New IAC Wiki
Jump to navigation Jump to search
Line 13: Line 13:
 
Also, we are limited to how much we can rotate the chamber.
 
Also, we are limited to how much we can rotate the chamber.
  
[[file:20120202_Clearance.jpg | 400 px]]
+
[[file:20120202_Clearance.jpg | 400 px]] Camera settings give this image a yellow hue...sorry :P
  
 
Because of this clearance issue, we couldn't even rotate the chamber 270°, but I don't even know if we will ever need to rotate the chamber this much.
 
Because of this clearance issue, we couldn't even rotate the chamber 270°, but I don't even know if we will ever need to rotate the chamber this much.
  
 
We got around this by shifting the entire chamber/strongback/upper shaft forward several inches.
 
We got around this by shifting the entire chamber/strongback/upper shaft forward several inches.

Revision as of 18:10, 3 February 2012

2/2/12

Chamber is being rotated this morning to start potting on the next endplate. All plugs and standoffs have been glued on this endplate.

There were clearance issues as we were trying to position the chamber to pot the other endplate.

20120202 WithRail.jpg

The magnet rail needed to be removed so that we could position the chamber properly.

20120202 WithoutRail.jpg

Also, we are limited to how much we can rotate the chamber.

20120202 Clearance.jpg Camera settings give this image a yellow hue...sorry :P

Because of this clearance issue, we couldn't even rotate the chamber 270°, but I don't even know if we will ever need to rotate the chamber this much.

We got around this by shifting the entire chamber/strongback/upper shaft forward several inches.